Puffco PEAK PRO Bedienungsanleitung Seite 6

6
7
Place carb cap on
top of chamber.
Press down until
snug. Use the
included chamber
jacket & tether to
keep it safe during
use.
9
Device will vibrate
and lights will flash
3 times when ready.
Inhaling gently will
produce the best
results. *See p. 10
for boost mode.
8
Attach tether here
10
Double click to
initiate heat-up.
Press and hold
button anytime to
exit. Pulsing light
indicates heat-up
mode is active.
Use a cotton swab or
Dual Tool to clean
the chamber after
each use.
Wipe gently in a
circular motion.