ProfiOffice Bindstream E25+ Bedienungsanleitung Seite 2

Dear customer,
thank you for choosing a ProfiOffice Germany binding machine. We are sure that this device
will serve you well Please take some time for studying this manual in order to make sure,
that you will work with the "Bindstream" safely, easy and adequate
Sincerely ProfiOffice Germany
Overview main component
1.) Comb opening mechanism
2.) Release pin
3.) Paper format slider
4.) Waste bin
5.) Paper instert slot
6.) Switch pat
7.) Margin knob
8.) Binding handle
! Precautions
A) Always ensure the machine is on a stable surface
B) Test punch scrap sheets and set the machine before punching final documents.
C) Remove staples
D) Keep the machine away from heat and water sources.
E)
Plug the machine
F) Turn off the machine after each use and unplug the machine when not use for an
extended period
Note: This machine
overheated during use It will automaticallyreset
I) Clean the paper case regularly and don't leave rubber ring to long in extended status
2) The unit can punch at most 4 pcs. of PVC transparent slides (0, 18 mm/pcs )
3) Punching at max sheet capacity is not recommended,
since it reduce the
Scheme of punching
A) Punching
Locate the side guide according to the size of
paper to be bound, then insert such paper,
press down the switch pat to its base to punch
the paper, then release switch pat again
parts
an other metal articles
into an easily accessible
features a thermal cut-out device, which activates
service life of the machine.
and binding
2
3
4
prior to punching
socket
when the machine is to operate
O
8
7
6
5
when the machine I