Installation - Rewatec Modena 200 Liter Montageanleitung

4. Installation

The filled containers are very heavy and have a high centre of gravity so they need to be installed
on a solid base.
Examples:
A In-situ soil
It must be stable and water-permeable, and must not become soft even during long periods of
rain.
B Layer of sand/gravel mixture or similar.
Firstly, excavate the installation site of the Modena container. Then apply a sand/gravel mixture,
crushed concrete or a similar material which can be compacted to produce a stable foundation.
C Apply a surface of composite stone, paving slabs, etc.
A surface can be installed on layer B if the surface is sufficiently stable.
Note:
The container can also be screwed onto a wall of the house as an additional protection against
tipping. However, the screw hole may not be lower than 50 mm below the upper edge of the
container.
Premier Tech Aqua • Rewatec
®
8/12 Modena 200 & 350 L
DORW2170 01.12.2015