Milwaukee MC125 Bedienungsanleitung

SPECIFICATIONS
pH
Range 0.0 to 14.0 pH
Resolution 0.01 pH
Accuracy
±0.2 pH
(@25°C)
Setpoint 4 to 8 pH
Electrode
MA911B/2
(included)
active when measurement is
Alarm & Output
higher/lower than the setpoint
Power Socket
depending on user selection
Environment 0 to 50°C, 95% RH max.
Power Supply 12 VDC (included)
Power Drivers 115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz
Dimensions 148.5 x 82.5 x 32 mm
Weight 200 g (meter only)
OPTIONAL ACCESSORIES
M10004B pH 4.01 buffer solution, 20 ml sachet (25 pcs)
M10007B pH 7.01 buffer solution, 20 ml sachet (25 pcs)
pH 10.01 buffer solution, 20 ml sachet
M10010B
(25 pcs)
Electrode rinse solution, 20 ml sachet
M10000B
(25 pcs)
Electrode storage solution, 20 ml sachet
MA9015
(25 pcs)
CERTIFICATION
Milwaukee Instruments conform to the CE
ORP
European Directives.
Disposal of Electrical & Electronic
±1000 mV
Equipment. Do not treat this product
1 mV
as household waste. Hand it over to the
appropriate collection point for the recycling
± 5 mV
of electrical and electronic equipment.
Please note: proper product prevents potential
-200 to 600 mV
negative consequences for human health and the
environment. For detailed information, contact your
MA921B/2
local household waste disposal service or go to
www.milwaukeeinstruments.com (USA & CAN) or
www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely
suitable for your specific application and for the
environment in which it is used. Any modification
introduced by the user to the supplied equipment
may compromise the meter's performance. For your
and the meter's safety do not use or store the meter in
hazardous environment. To avoid damage or burn, do
not perform any measurement in microwave ovens.
WARRANTY
This instrument is warranted against defects in
materials and manufacturing for a period of 2 years
from the date of purchase. Probe is warranted for
6 months. This warranty is limited to repair or free
of charge replacement if the instrument cannot be
repaired. Damage due to accidents, misuse, tampering
or lack of prescribed maintenance is not covered by
warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair
is not covered by the warranty, you will be notified of
the charges incurred. When shipping any meter, make
sure it is properly packaged for complete protection.
We reserve the right to modify the design,
construction and appearance of our products
without advance notice.
ISTMC125_07_20
USER MANUAL
RoHS
COMPLIANT
PRO Digital pH/ORP
milwaukeeinstruments.com (USA & CAN)
SATISFACTION
GUARANTEED
MC125
Controller
milwaukeeinst.com