How To Charge; Safety And Care - Forcell F-Audio Bedienungsanleitung

Next track Press and hold volume- key for 2 sec.
Answer/end call Press MFB key once
Reject call Press and hold MFB key for 2 seconds
Activate Siri/voice
Press and hold MFB key for 2 seconds
assistant
Redial number Press MFB key twice

How to charge

1. How to use an AC power cord: To assure safe operation,
use the original charging cable, supplied. Do not operate the
headset while charging.
2. A red light is on while the device is charging. The screen
shows a percentage of the current power status.
3. After the headset has been fully charged, a red light goes off
and the screen shows: „100".
Two calls
When another call is coming in while you are talking:
1. Press the MFB key twice to keep the current call and answer
the incoming connection;
2. Press the MFB key twice to switch between two talks;
press the MFB key once to end the current call and switch
into another.
Note: To use the aforesaid functions, your mobile phone
must support the Bluetooth 1.5 wireless mode and you must
activate the call waiting function (network service).
How to pair a second device
At first connect the headset to the first device. Disable the
Bluetooth to let the headset enter the pairing mode. Next
connect the headset to the second device. Finally enable the
Bluetooth of the first device and press the key to reconnect.
Both devices can now be connected to the headset at the
same time.
Note: Keep a distance of 0.3m while pairing

Safety and care

1. Keep the headset away from source of high temperatures
and humidity as high temperature shortens the lifespan of the
Blue light flashes every 5 sec.
Blue light flashes every 5 sec.
Blue light flashes every 5 sec.
Blue light flashes every 5 sec.
Blue light flashes every 5 sec.