Werbung
1 Registration management card:
Blue
: management card (2 pcs), Red:user card (2 pcs, for lock opener) , Black: user card (2 pcs, for gate opener)
(Note: The administrator card will be set at the factory. Keep this Card safe. If lost or disappears please
contact our support)
1. During standby mode, press the SET button.
2. The LED show blue, and the red LED flicker.
3. Swipe the card , heard the "DI----DI DI" sound, manager
card set successfully.
Up to 2 management card can be registered
simultaneously. Attempt to register 3rd management card ,heard the "DI----" sound, and the lights
are all off, Indicates that 2 management cards have been registered
Press registration button to exit , or automatically exit after about 90s.
2 Cancellation of management card:
1. During standby mode, press the SET button until the
LED show blue, and the red LED flicker.
2. Within 30s, press the SET button again until hear the
"DI----DI DI" sound. The blue LED turns off and the red
LED flicker.
3. Swipe the successfully registered management card,
hear the "DI----DI DI" sound, the red light goes out,
express delete all management cards
3 Registration user card: (for lock opener)
1. During standby mode, swipe the management card. the
LED lights turns blue
2. Press call button in the next 10s, heard the "DI" sound
and the red led flicker
3. Swipe the new card, hear the "DI DI" sound, the user card
set successfully.
Register up to 50 user cards
Press call button to exit , or automatically exit after about 90s.
13
Werbung
