Exsys EX-1110HMVS-PL Anleitung

JUMPER SETTING
Jumper for power supply control:
The two jumpers Bus Power (JP1) and Host Control (JP10) can be used to configure the
power supply and power output at the downstream ports as required. The following settings can
be made:
ENA
Jumper JP1
DIS
HOST
Jumper JP10
ON
Settings Status
Jumper JP1 Jumper JP10 Power Host PC
Bus Power Host control
on off
ENA ON
(ble) (Power on)
off on
on off
DIS ON
(able) (Power on)
off on
on off
ENA HOST
(ble) (control)
off on
on off
DIS HOST
(able) (control)
off on
on on
DIS/ENA HOST/ON
off off
5
CONNECTIONS
USB 3.2 Gen 1 A-Port:
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
VCC
USB 3.2 Gen 1 B-Port:
GND_DRAI
StdB_SSTX
StdB_SST
D-
D+
+7V - 24V DC Terminal Block:
Function
Hub Downstream
Data Power
no on
yes on GND (Ground)
+7V - 24V
no on
no off
no off
HARDWARE INSTALLATION
yes on
no off
As this is a PCBA for installation in customer applications, we are unable to provide you with
no off
installation instructions. Please observe the necessary safety precautions during installation.
yes on
no off
Germany: Switzerland:
EXSYS Vertriebs GmbH EXSYS Vertriebs GmbH
Industriestrasse 8 Dübendorfstrasse 17
61449 Steinbach 8602 Wangen
www.exsys.ch
www.exsys.de
StdB_SSTX+
Attention!
StdB_SSTX -
Never plug in with
force or in wrong
direction.
GND
D- D+
StdB_SST
Attention!
StdB_SST
Never plug in with
force or in wrong
VBus
direction.
GN
ATTENTION!
Please pay attention to the correct polarity!
Never connect the power supply unit to the terminal
block when it is switched on!
ATTENTION!
When installing in your application, take the necessary ESD
precautions.
Italy:
EXSYS Italia Srl
Via Belvedere, 45/B
I-22100 Como
www.exsys.it
6
EX-1110HMVS-PL
Anleitung Anleitung
Vers. 1.0 / 30.09.24
AUFBAU
7-24V T-Block für 1x USB 3.2 Gen 1
optionales Netzteil Upstream B-Buchse
Betriebs LED
2x Jumper zur
Betriebsart-
Individualisierung
BESCHREIBUNG & TECHNISCHE DATEN
Das USB 3.2 Gen 1 Hub Board EX-1110HMVS-PL ist ein voll funktionsfähiger industrieller USB
3.2 Hub mit zehn Downstream-Ports für die Integration in kundenspezifische Geräte,
Baugruppen oder Gehäuse. Er ist ideal für Embedded Systeme, Kioske, industrielle
Automatisierung und andere Spezialanwendungen, die mehrere USB-Anschlüsse benötigen.
Kompatibilität: USB 1.1, 2.0, 3.0, 3.1, 3.2
Betriebssysteme: Betriebssystemunabhängig, keine Software oder Treiber notwendig
Anschlüsse: 10x USB 3.2 Gen 1 A-Buchse, 1x USB 3.2 Gen 1 B-Buchse,
1x Terminal Block 7-24V DC
Lieferumfang: EX-1110HMVS-PL, Terminal Block
1
10x 3.2 Gen 1
Downstream A-Buchse