Link2Home 6820F Bedienungsanleitung Seite 42

Setup
Montaż panelu słonecznego
Step 1
Position the panel so that it can capture as much light as possible. It requires only
a few hours of direct sunlight per day to keep your camera charged 24 hours a
day. Use the included tools and cable to attach and setup the panel.
Step 2
Remove the wall bracket from the solar panel and fix it
with the screws and plugs provided in the pack. (Anchors
should not be used in wood and metal).
Step 3
Replace the solar panel on the bracket and make sure it is
properly secured.
Step 4
Place the solar panel so that it faces directly into the
sunlight.
Step 5
Connect the cable to the Link2home outdoor camera to
keep the camera fully charged.
Sun
41