Moss Pro 2 Benutzerhandbuch Seite 4

6. After use, you need to push the switch button to position "0", the product is
off, and pull out the power plug and fold up the handle at the same time.
7. There is a strap on the power cord. You can tie up the long power cord. It is
convenient for you to store the product in a safe, dry and clean place for your
next use.
8. Please do not discard this part when using! There are three layers of filtration
at the inlet and a removable inlet cover. You can remove the inlet cover from
time to time to clean up the ash and dirt deposited in the inlet net. In this way,
the product will accompany you for a long time to live a healthy and happy life.
TROUBLESHOOTING AND ANALYSIS
Malfunction
Can't start or interrupt continuously 1. The power cord is not plugged
overheat
The wind is obviously less, and the
temperature rises.
The power cord's temperature is
too high or the plug's temperature
is too high. Sharply.
Does not work or does not respond
after the motor starts.
There are noise and burnt smell.
Possible reason
in well.
2. The power cord is disconnected.
3. Poor contact of the switch.
1. The air inlet is blocked.
2. The motor is not normal.
1. Air inlet blockage.
2. The motor is not normal.
3. Diode damage.
Power cord disconnection is poor.
1. Motor carbon brush wear abrasion.
2. Motor damage.
Internal accessories are not normal.
Please do not discard this
part when using!
Solutions
1. Plug in the socket.
2. Ask the professional to replace
the power cord.
3. Ask the professional to replace
the motor.
4. Contact us.
1. Please clean the air inlet regularly.
2. Send the seller or the company
to repair or get a replacement.
1. please clean the air inlet regularly.
2. Send it to the seller or the
company to overhaul.
1. Ask the professional to replace
the power cord.
2. Contact us.
Please stop using and contact us.
Please stop using and contact us.