Pixel P45 RGB Gebrauchsanleitung Seite 6

2.Group Setting:
Press Group Setting
D/E/F recycling. Display
switching to the different
the setting base on the new group.
c 3.ChanneI Setting
Press Channel setting
to adjust CHOI —CH48 recycling.
4.Quick Brightness Adjust
Press the quick brightness
display is showing 0% which is mean turn off.
5.MODE Setting
Press[ MODE ]switch to change between color gamut (HSI),
color temperature (CCT), light effect (FL S) recycling.
6.Dial Knob Button Operation
Rotate the dial to adjust
differ effects. Press the middle
mode.
Dial Knob
8
change to next group, total A/B/C/
shows existing group. When
group, the LED will also change
button, dim the multi-function
adjust button to change 00/0/1%
total in six step recycling.
the brightness or change
button to change
Button Switch
7 .Full color gamut mode adjust(HSl)
Press[ MODE ]button until display shows (HSI), dim the dial to
adjust the brightness between 0—100. Press the multi-function
button enter color gamut mode and dim the dial to adjust
between 0—3600. Press the multi-function
to saturation mode and dim the dial to adjust the saturation
between 0—100. After six seconds, the icon adjusts the
dial
brightness by default (As figure)
01000/0
When
Full Color Gamut Adjus
the 9
the
8.Color temperature
Press[ MODE ] button until display shows (CCT), dim the
dial to adjust the brightness
multi-function
between 2600-10000K.
the brightness
01000/0
Color Temperature
HSI 01000/0
Color Saturation Adjust
a 3600 e
100%
Brightness Adjust
mode adjust(CCT)
between 0—100. Press the
button enter to adjust the color temperature
After six seconds,
by default (As figure)
& 10000K
10000K
Adjust
button again enter
HSI
the icon adjusts
CCTU/IO
Brightness Adjust
9