Tesla Smart Kitchen Scale Benutzerhandbuch Seite 2

MANUAL CONTROL
If you do not connect the scale to the app, place the food on the scale and the scale will
measure the weight of the food according to the steps below:
Weighing
- Press the button and wait until the display shows „0".
- Place the item(s) to be weighed on the weighing surface. The display will show the wei-
ght.
- The display can be changed between g /lb:oz / fl.oz / oz / ml using the corresponding
:UNIT" button.
Functions
- If you want to weigh items in a container, place the container on the weighing surface
before turning on the scale. You can reset the weight of the container by pressing the „ „
button. The display will show „0".
- Now add the items you want to weigh. The display will show the weight. Press the „ „
button. The display will show „0" again. You can now add another item to be weighed.
You can repeat this procedure several times as required.
- After use, the scale can be switched off by holding the " " button. However, if no
button is pressed within 4 minutes, the scale will switch off automatically.
APP CONTROL
1. Press the power button "ICON" on the device and wait, until the display shows "0".
2. Click on the „Select food" button on the "Scale" page and enter the name of the food
and then select the food from the food bank database. Confirm your selection.
You can add your food that is not in the food bank database by clicking "Add" in the food
bank.
3. Place the food on the weighing surface on the device and the app screen will display all
the nutrient count values.
Nutrition: Weight / Calories / Protein / Fat / Cholesterol / Sodium / Carbohydrates /
Fiber / Sugar / Vitamin D / Vitamin A / Vitamin E / Vitamin B6 / Vitamin B12 / Calcium /
Iron / Potassium / Magnesium / Manganese / Zinc / Copper / Phosphorus / Selenium /
Retinol Equivalent / Niacin
4. Click on the "Add to plate" button to add food to your plate.
5. Click on the "Plate" page to see the details of the food on your plate and the total of the
current Kcal on your plate.
- By clicking on "Confirm record" you can add current entry to the records.
- By clicking on "Nutrition analysis" you can see breakdown of each individual nutritional
value.
- By clicking on "Edit plate" you can remove entries from your current plate.
6. Click on the "Record" page to see a history of all food ingested as well as RNI (Kcal) -
Current (Kcal) - Remaining (Kcal).
- By clicking on "Nutrition report" you can enter entire nutrition analysis report.
- By clicking on "Edit records" you can remove entries from your reports.
2