Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTION FOR USE
READ ALL INSTRUCTIONS BEFORE USING
1.
Plug into the mains and turn on by pressing the power
button down for two seconds.
2.
Adjust heat between 100°C and 200°C by touching the
temperature arrow up or down until the LED is positioned
on the desired temperature. The LED blinks while heating
up or cooling down, and turns solid once temperature
stabilises.
When the temperature is set at the highest, the
indicator turns off. When the temperature is set at the
lowest, the
3.
To activate REVIVE MODE press the power button lightly.
You can then adjust the heat between 100°C and 200°C by
touching the temperature arrow up or down.
4.
Before using the styling iron, ensure your hair is dry.
5.
Separating hair into sections allows easier styling. Pass
through hair starting near the scalp, at a steady, controlled
pace. CLOUD NINE's advanced technology usually requires
just one pass to achieve styling results.
6.
The iron goes into hibernation mode after 30 minutes of
inactivity, emits a warning beep and the LED indicator
blinks slowly. To re-use, clamp the iron once or shortly press
the power button.
7.
After use, turn power off, unplug the cord and store in a safe
location. Do not wind the cord around the styling iron.
Allow plates to cool before storing.
LED indicator turns off.
LED
Werbung
