Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Overview
Spectrum for light sensor
OPERATION
Please follow the points below before beginning with the first measurement:
1. To gain access to the battery compartment on the rear side of the device, remove the housing's elastic
cover. Then, use a fitting screwdriver to loosen the screw on the battery cover. Remove the battery cover
and connect the 9 V block battery with the poles. Make sure that the poles are correct. Replace the
battery cover and put the elastic cover back on the housing.
If the device is not used for a longer period (approx. 1-2 weeks), please remove the battery to prevent
damage in case of battery leakage. When replacing a discharged battery, remove the old battery from
the battery compartment.
__
V ( )
...
light meter
10/12
(1) Display/measuring value
(2) POWER on/off button
(3) Scale unit button LUX/FC
(4) PEAK button
(5) HOLD button
(6) (Measuring) RANGE button
(7) Coiled cable
(8) Indication Data Hold
(9) Indication max. measurand
(10) Indication battery exhausted
(11) Indication scale unit
(12) Indication measuring range
(13) Light sensor
00038136.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
