Important Information Be sure to follow this information so as not to harm yourself or others, or damage this instrument or other external equipment Power adapter: Please use only the specified DC adapter supplied with the product. An incorrect or faulty adapter can •...
Contents Important Information Power adapter Do not open the body of the electronic keyboard: Use of the Electronic Keyboard Maintenance During operation Specifications Controls, Indicators and External Connections Front Panel Back Panel Power AC/DC power adapter Battery operation Jacks and Accessories Using headphones Connecting an Amplifier or Hi-Fi Equipment LED Display...
Power AC/DC power adapter Please use the AC/DC power adapter that came with the electronic keyboard or a power adapter with DC 9V output voltage and 1,000mA output, with a centre positive plug. Connect the DC plug of the pow- er adapter into the DC 9V power socket on the rear of the keyboard and then connect to the outlet.
Connecting an Amplifier or Hi-Fi Equipment This electronic keyboard has a built-in speaker system, but it can be connected to an external amplifier or other Hi-Fi equipment. First turn off the power to the keyboard and any external equipment you want to connect. Next insert one end of a stereo audio cable (not included) into the LINE IN or AUX IN socket on the external equipment and plug the other end into the [PHONES] jack on the rear of the electronic keyboard.
Adjusting the Master Volume The keyboard has 16 levels of volume, from 0 (off) 15(full). To change the volume, touch the [VOLUME +/-] buttons. Pressing both the [VOLUME +/-] buttons at the same time will make the Volume return to the default level (level 12). The volume level will be reset to level 12 after power off and power on.
Effects The Keyboard has Vibrato and Sustain sound effects. Press once to activate; press again to deactivate. The Vibrato and Sustain effects can be used on keynotes, or on a Demo Song. Percussion The Keyboard has 8 percussion and drum effects. Press the keys to produce a percussive sound. The percussion effects can be used in combination with any other mode.
To select a Rhythm Press any of the [RHYTHM] buttons to turn on that Rhythm function. With a Rhythm playing, press any other [RHYTHM] button to change to that Rhythm. Press the [STOP] button to stop the Rhythm playing. Press the [FILL IN] button to add a fill to a rhythm that is playing.
Synchronize Press the [SYNC] button to activate the synchronize function. Press any of the 19 keys on the left of the Keyboard to activate the selected Rhythm as you begin to play. Recording Press the [RECORD] button to enter Record Mode. Play a sequence of notes on the Keyboard for a Recording. Press the [RECORD] button again to save the Recording.
Trouble Shooting Problem Possible Reason / Solution A faint noise is heard when turning the power on or This is normal and nothing to worry about. off. After turning the power on to the keyboard there Check the volume is set to the correct setting. Check that was no sound when the keys were pressed.
FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired •...
Seite 17
Guide utilisateur pour le clavier multifonction RJ-549...
Informations importantes Assurez-vous de respecter ces informations afin de ne pas vous blesser ou de blesser autrui ou d'endommager cet instrument ou d'autres équipements externes. Adaptateur d'alimentation : Utilisez uniquement l'adaptateur CA spécifié fourni avec le produit. Un adaptateur inapproprié ou •...
Seite 19
Contenu Informations importantes Adaptateur d'alimentation : N'ouvrez pas le corps du clavier électronique : Maintenance : Spécifications : Commandes, indicateurs et connexions externes Panneau avant Panneau arrière Alimentation Adaptateur de courant CA/CC : Fonctionnement avec piles : Jacks et accessoires Utilisation d'un casque Connecter un amplificateur ou de l'équipement Hifi Écran LED :...
Haut-parleur 15. Tempo [Lent/rapide] Interrupteur 16. Accord à plusieurs doigts Vibrato 17. Synchronisation Accord de basse 18. Accords à un doigt Résonance 19. Désactiver les accords Son des accords 20. Clavier des accords Volume +/- 21. Programmation du rythme Sélection de la 22.
Alimentation Adaptateur de courant SA/CC Veuillez utiliser l'adaptateur d'alimentation CA/CC fourni avec le clavier numérique ou un adaptateur d'alimentation avec une tension de sortie CC 12 V et une intensité de sortie de 1.000 mA avec une tension positive à la fiche centrale. Connectez la fiche CC de l'adaptateur d'alimentation à la douille d'alimentation CC 9V à...
Connecter un amplificateur ou de l'équipement Hifi Ce clavier électronique dispose d'un système de haut-parleurs intégré mais il peut être connecté à un amplificateur externe ou à d'autres équipements Hifi. équipement. Mettez d’abord le clavier hors tension ainsi que tout équipement que vous souhaitez connecter. Insérez ensuite l'embout d'un câble audio stéréo (non inclus) dans la douille LINE IN ou AUX IN de l'équipement externe et branchez l'autre bout au jack [PHONES] à...
Régler le volume principal Le clavier a 7 niveaux de volume de 0 (éteint) à 7 (maximal). Afin de modifier le volume, appuyez sur les boutons [VOLUME +/-]. Si vous appuyez en même temps sur les boutons [VOLUME +/-], le volume de l’accompagnement est réinitialisé...
Effets Le clavier dispose des effets sonores Vibrato (vibration) et Sustain (résonance). Appuyez une fois pour l’activer ; appuyez de nouveau pour le désactiver. Les effets Vibrato et Sustain peuvent être utilisés avec les touches du clavier, ou également avec un morceau de démonstration. Percussions Le clavier dispose de 8 effets de percussions et de batterie.
Sélectionner un rythme Appuyez sur n’importe quel bouton [RHYTHM] pour activer cette fonction rythme. Lorsqu'un rythme est en cours de lecture, appuyez sur n’importe quel autre bouton [RHYTHM] pour changer de rythme. Appuyez sur le bouton [STOP] pour arrêter la lecture du rythme. Appuyez sur le bouton [FILL IN] pour ajouter un accompagnement au rythme en cours de lecture.
Synchronisation Appuyez sur le bouton [SYNC] pour activer la fonction de synchronisation. Appuyez sur n’importe laquelle des 19 touches sur la gauche du clavier pour activer le rythme sélectionné pendant que vous jouez. Enregistrement Appuyez sur le bouton [RECORD] pour entrer dans le mode enregistrement. Jouez une séquence de notes sur le clavier pour les enregistrer.
Dépannage Raison / solution possible Problème On entend un léger bruit quand on met l'appareil Cela est normal et il n'y a pas de quoi s'inquiéter. sous ou hors tension. Après avoir allumé le clavier, il n'y a pas de son Vérifiez que le volume maître est correctement réglé.
FCC classe B partie 15 Ce dispositif est conforme à la section 15 des réglementations de la Federal Communications Commission (FCC). Son fonctionnement est soumis aux deux conditions suivantes : Cet appareil ne doit pas causer d'interférences nuisibles. • Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un •...
Seite 32
RJ549 Multifunktion Keyboard Bedienungsanleitung...
Wichtige Information Beachten Sie folgende Informationen, damit Sie nicht sich selbst oder andere verletzen oder dieses Instrument oder weitere externe Einrichtungen beschädigen. Stromadapter: Bitte verwenden Sie nur den mitgelieferten DC-Netzadapter: Ansonsten kann das elektronische Keyboard • beschädigt werden. Installieren Sie den DC-Netzadapter oder das Stromkabel nicht in der Nähe von Wärmequellen wie •...
Seite 34
Inhalt Wichtige Informationen Stromadapter Öffnen Sie niemals das elektronische Keyboard: Anwendung des elektronischen Keyboards Wartung Beim Betrieb Spezifikationen Bedienungen, Anzeigen und externe Anschlüsse Frontplatte Rückplatte Strom AC/DC-Netzadapter Batteriebetrieb Jacks und Zubehör Verwendung von Kopfhörern Anschließen eines Leistungsverstärkers oder einer Musikanlage LED-Anzeige Keyboardbetrieb Einschalten...
Strom AC/DC-Netzadapter Bitte verwenden-Sie den speziellen AC/DC Netzadapter, der mit dem elektronischen Keyboard mitgeliefert ist oder ein Netzadapter mit DC 9 V Ausgangsspannung und 1.000 mA Ausgang mit einem Zentrum-positiven Stecker. Stecken Sie den DC-Stecker des Netzadapters in die DC 9 V 9 V Buchse an der Hinterseite des Keyboards und stecken Sie es in die Wandsteckdose ein.
Anschließen eines Leistungsverstärkers oder einer Musikanlage Dieses elektronische Keyboard besitzt ein integriertes Lautsprechersystem, aber es kann auch an einen externen Leistungsverstärker oder an eine Musikanlage angeschlossen werden . Zunächst schalten Sie das Keyboard aus, sowie jegliche externe Anlage, die Sie anschließen möchten. Dann, stecken Sie ein Ende eines Stereo Audio-Kabels (nicht enthalten) in die LINE IN oder AUX IN Buchse der externen Anlage und stecken Sie das andere Ende in den [PHONES] Jack an der Hinterseite des elektronischen Keyboards.
Einstellen der Hauptlautstärke Das Keyboard hat 16 Lautstärken-Niveaus von 0 (off) bis 15 (full). Um die Lautstärke zu ändern, drücken Sie auf die [VOLUME +/-] Tasten. Wenn Sie gleichzeitig auf beide [VOLUME +/-] Tasten drücken, stellt sich die-Lautstärke auf die Standard-Lautstärke zurück (Stärke 12). Die Lautstärke wird auf 12 zurückgestellt, wenn das Gerät aus- und wieder eingeschaltet wird.
Effekte Das Keyboard besitzt Vibrato und Sustain Toneffekte. Drücken Sie einmal, um den Effekt einzuschalten, drücken Sie nochmal, um dieses auszuschalten. Die Vibrato und Sustain Effekte können mit den Tasten verwendet werden, oder mit einem Demo Song. Perkussion Das Keyboard besitzt 8 Perkussion- und Trommeleffekte. Drücken Sie die Tasten, um ein Perkussionston zu erzeugen.
Einen Rhythmus auswählen Drücken Sie irgendeine [RHYTHM]Taste, um diese Rhythmus-Funktion einzuschalten. Wenn ein Rhythmus spielt, drücken Sie irgendeine andere [RHYTHM] Taste, um diesen Rhythmus einzuschalten. Drücken Sie die [STOP-] Taste, um den Rhythmus zu stoppen. Drücken Sie die [FILL IN] Taste, um dem Rhythmus eine Begleitung hinzuzufügen.
Synchronisierung Drücken Sie die [SYNC] Taste, um die Synchronisierung-Funktion zu aktivieren. Drücken Sie irgendeine der 19 Tasten auf der linken Seite des Keyboards, um den ausgewählten Rhythmus zu aktivieren, wenn Sie zu spielen beginnen. Aufzeichnen Drücken Sie die [RECORD] Taste, um den Aufzeichnungs-Modus einzuschalten. Spielen Sie Noten auf dem Klavier, um diese aufzuzeichnen.
Fehlersuche Problem Mögliche Ursache / Lösung Beim Ein- und Ausschalten ist ein schwaches Dies ist normal und es gibt keinen Grund, sich Sorgen zu Geräusch zu hören. machen. Nachdem das Keyboard eingeschaltet wurde, gab Überprüfen Sie, dass die Lautstärke richtig eingestellt ist. es keinen Ton, wenn die Tasten gedrückt wurden.
FCC Class B Teil 15 Dieses Gerät erfüllt Teil 15 der FCC-Bestimmungen (Federal Communications Commission). Für den Betrieb gelten die folgenden zwei Bedingungen: Dieses Gerät darf keine schädlichen Interferenzen verursachen. • dieses Gerät muss empfangende Interferenzen aufnehmen können, auch Interferenzen, die eventuell •...
Seite 47
Guida per l’Utente Tastiera multifunzione RJ549...
Informazioni importanti Assicurarsi di rispettare le seguenti informazioni in modo da non danneggiare se stessi o altre persone o danneggiare lo strumento o altre apparecchiature esterne Adattatore alimentazione: Utilizzare solo l'adattatore CC specificato fornito con il prodotto. Un adattatore non corretto o difettoso può •...
Seite 49
Indice Informazioni importanti Adattatore alimentazione Non aprire il corpo della tastiera elettronica: Uso della tastiera elettronica Manutenzione Durante il funzionamento Specifiche Controlli, Indicatori e Collegamenti esterni Pannello anteriore Pannello posteriore Alimentazione Adattatore di alimentazione CA/CC Funzionamento della batteria Prese Jack e Accessori Uso delle cuffie Collegamento di un Amplificatore o di un Dispositivo Hi-Fi Display a LED...
Alimentazione Adattatore di alimentazione CA/CC Utilizzare l'adattatore di alimentazione CA/CC fornito con la tastiera elettronica o un adattatore di alimentazione con tensione di uscita CC 9V e di uscita da 1.000 mA con una spina positiva centrale. Collegare la spina CC dell'adattatore di alimentazione nella presa di corrente CC 9V sul retro della tastiera e collegare alla presa.
Collegamento di un Amplificatore o di un Dispositivo Hi-Fi Questa tastiera elettronica è dotata di un sistema di altoparlanti incorporato, ma può essere collegato ad un amplificatore esterno o ad altri dispositivi Hi-FI. Per prima cosa, spegnere la tastiera e qualsiasi apparecchiatura esterna che si desidera collegare. Successivamente inserire un'estremità...
Regolare il Volume Master La tastiera ha 16 livelli di volume, da 0 (spento) a 15 (massimo). Per modificare il volume, toccare i pulsanti [VOLUME +/-]. Premendo entrambi i pulsanti [VOLUME +/-] contemporaneamente, il volume tornerà al livello predefinito (livello 12). Il livello del volume verrà ripristinato a 12 dopo lo spegnimento e l'accensione. Selezione Tono Vi sono 10 possibili toni.
Effetti La tastiera ha effetti sonori Vibrato e Sustain. Premere una volta per attivare; premere nuovamente per disattivare. Gli effetti Vibrato e Sustain possono essere utilizzati su note chiave o su una Demo Brano. Percussione La tastiera offre 8 effetti di percussione e batteria. Premere i tasti per produrre un suono percussivo. Gli effetti di percussione possono essere usati in combinazione con qualsiasi altra modalità.
Per selezionare un Ritmo Premere qualsiasi dei tasti [RHYTHM] per avviare detta funzione Ritmo. Con la riproduzione di un Ritmo, premere qualsiasi altro pulsante [RHYTHM] per passare a detto Ritmo. Premere il tasto [STOP] per fermare la riproduzione del Ritmo. Premere il tasto [FILL IN] per aggiungere un fill a un ritmo che sta suonando. 0.
Sincronizza Premere il tasto [SYNC] per attivare la funzione sincronizza. Premere uno dei 19 tasti a sinistra della tastiera per attivare il ritmo selezionato mentre si inizia a suonare. Registrazione Premere il tasto [RECORD] per accedere alla modalità Registrazione. Suona una sequenza di note sulla Tastiera per una Registrazione.
Risoluzione dei problemi Problema Possibile causa/Soluzione Quando si accende o si spegne l'alimentazione si Questo è normale e non c'è niente da preoccuparsi. sente un rumore debole. Dopo aver acceso la tastiera, non è stato Controllare che il volume sia impostato sull’impostazione emesso alcun suono quando i tasti sono stati corretta.
FCC Classe B Sezione 15 Questo dispositivo è conforme alla Sezione 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: Questo dispositivo non può causare interferenze dannose. • Questo dispositivo deve accettare tutte le interferenze ricevute, incluse le interferenze che possono •...
Seite 62
Teclado multifuncional RJ549 Guía del Usuario...
Información importante Asegúrese de seguir esta información para no hacerse daño ni a usted ni a otras personas, ni dañar este instrumento u otro equipo externo. Adaptador de corriente: • Utilice únicamente el adaptador específico de CC suministrado con el producto. Un adaptador incorrecto o defectuoso puede dañar el teclado electrónico.
Seite 64
Contenido Información importante ................................2 Adaptador de corriente: ..................................2 No abra el cuerpo del teclado electrónico: ............................2 Uso del teclado electrónico: ................................2 Mantenimiento: ....................................2 Durante la operación: ..................................2 Especificaciones: ....................................2 Controles, Indicadores y Conexiones Externas ........................4 Panel Frontal ......................................4 Panel Posterior ....................................5 Potencia ......................................6 Adaptador de corriente CA / CC ..............................6...
Altavoz 15. Tempo [Lento / Rápido] Interruptor de Encendido 16. Acordes de Varios Dedos Vibrato 17. Sincronizar Acorde de Bajo 18. Acordes de un Solo Dedo Sustain 19. Acorde Apagado Tono de Acorde 20. Teclado de Acorde Volumen +/- 21. Programa de Ritmo Selección de tonos 22.
Potencia Adaptador de corriente CA / CC Utilice el adaptador de alimentación de CA/CC que viene con el teclado electrónico o un adaptador de alimentación con voltaje de salida de CC de 9 V y una salida de 1.000 mA, con un enchufe central positivo. Conecte el enchufe de CC del adaptador de corriente a la toma de corriente CC de 9V en la parte posterior del teclado y luego conéctelo a la toma de corriente.
Conectar un Amplificador o Equipo de Alta Fidelidad (HI-FI) Este teclado electrónico tiene un sistema de altavoces incorporado, pero además se puede conectar a un amplificador externo u otro equipo de alta fidelidad. Primero, apague la alimentación del teclado y de cualquier equipo externo que desee conectar.
Ajuste del Volumen Principal El Teclado tiene 16 niveles de volumen, desde 0 apagado (off) 15 completo (full). Para cambiar el volumen, tocar los botones de [VOLUMEN +/-]. Presionando los botones de [VOLUMEN +/-] en el mismo tiempo hará volver el Volumen al nivel predeterminado (nivel 12).
Efectos El Teclado tiene los efectos de Vibrato y Sustain. Presiona una vez para activar; presiona de nuevo para desactivar. Los efectos de Vibrato y Sustain puede ser usadas en las teclas de notas o en las Canción Demo. Percusión El Teclado tiene 8 percusiones y efecto de tambor.
Seleccionar un Ritmo Presiona cualquier botón de [RITMO] para activar la función del Ritmo. Con la reproducción de un Ritmo, presiona cualquier otro botón de [RITMO] para cambiar a este Ritmo en concreto. Presiona el botón de [STOP] para parar la reproducción del Ritmo.
Sincronizar Presiona el botón [SINC] ([SYNC]) para activar la función de sincronizar. Presiona cualquiera de las 19 teclas de la parte izquierda del teclado para activar el Ritmo seleccionado desde el comienzo de la reproducción. Grabación Presiona el botón [GRABACIÓN] ([RECORD]) para activar la Modalidad de Grabación. Reproduce una secuencia de notas en el Teclado para la Grabación.
Solución de problemas Problema Causa Posible / Solución Se oye un leve ruido al encender o apagar la alimentación. Esto es normal y nada es para preocuparse. Después de encender el teclado, no se ha escuchado Verifica si el volumen está configurado en la configuración ningún sonido cuando se han presionado las teclas.
Clase B Parte 15 de la CFC Este dispositivo cumple con la Parte 15 de las Reglas de la Comisión Federal de Comunicaciones (CFC). La operación está sujeta a las siguientes dos condiciones: • Este dispositivo no puede causar interferencias perjudiciales. •...
Seite 77
RJ-549 Wielofunkcyjny instrument klawiszowy Podręcznik użytkownika...
Ważne informacje Pamiętaj, by stosować się do informacji zawartych poniżej, aby nie zrobić krzywdy sobie lub innym, ani nie uszkodzić instrumentu lub innych podłączonych do niego urządzeń. Zasilacz sieciowy: • Prosimy używać wyłącznie specjalnego zasilacza AC dołączonego do wyrobu. Niewłaściwy lub wadliwy zasilacz może uszkodzić...
Seite 79
Spis treści Ważne informacje Zasilacz sieciowy Nie otwieraj obudowy instrumentu Konserwacja Specyfikacja Przełączniki, wskaźniki i gniazda zewnętrzne Panel przedni Panel tylny Zasilanie Transformatorowy zasilacz sieciowy Korzystanie z baterii Gniazda typu jack i akcesoria Korzystanie ze słuchawek Podłączenie wzmacniacza lub sprzętu hi-fi Wyświetlacz LED Obsługa instrumentu klawiszowego Włączanie i wyłączanie...
Zasilanie Transformatorowy zasilacz sieciowy Prosimy używać specjalnego transformatorowego zasilacza sieciowego dołączonego do instrumentu klawiszowego, lub zasilacza sieciowego o napięciu wyjściowym 9V DC, prądzie wyjściowym 1000 mA, z wtykiem z plusem w środku. Podłącz wtyk prądu stałego (DC) do gniazda DC 9V na tylnej części obudowy instrumentu klawiszowego, a następnie podłącz wtyczkę...
Podłączenie wzmacniacza lub sprzętu hi-fi Instrument posiada wbudowany zestaw głośników, ale można go również podłączyć do zewnętrznego wzmacniacza lub innego sprzętu hi-fi. Przed podłączeniem jakiegokolwiek urządzenia zewnętrznego wyłącz zasilanie instrumentu. Następnie włóż koniec kabla stereo (brak w zestawie) do gniazda LINE IN lub AUX IN urządzenia zewnętrznego, a drugi koniec do gniazda [PHONES] z tyłu obudowy instrumentu.
Regulacja ogólnego poziomu dźwięku Instrument ma siedem ustawień poziomu natężenia dźwięku oznaczonych cyframi od 0 (wyłączony) do 7 (maksymalny). Aby zmienić głośność, dotknij przycisków [VOLUME +/-]. Wciśnięcie obydwu przycisków [MAIN VOLUME +/-] jednocześnie spowoduje powrót ogólnego poziomu dźwięku instrumentu do ustawienia domyślnego (5).
Efekty W instrumencie zastosowano dwa efekty dźwiękowe: dźwięk wibrujący (Vibrato) i wybrzmiewanie dźwięku (Sustain). Wciśnij wybrany przycisk, aby włączyć dany efekt. Wciśnij go ponownie, aby wyłączyć. Efekty Vibrato i Sustain mogą być używane podczas gry na klawiaturze, lub w utworach demonstracyjnych.
Wybór rytmu Wciśnij dowolny przycisk z grupy [RHYTHM], aby włączyć daną funkcję. Podczas odtwarzania podkładu rytmicznego wciśnij dowolny inny przycisk [RHYTHM], aby zmienić rytm. Wciśnij [STOP], aby zatrzymać odtwarzanie rytmu. Aby dodać przejście do odtwarzanego rytmu, wciśnij przycisk [FILL IN]. Rock ‘n’...
Synchronizacja Wciśnij przycisk [SYNC], aby włączyć funkcję synchronicznego startu. Wciśnij jeden z 19 klawisz od lewej strony klawiatury, aby rozpocząć grę z wybranym podkładem rytmicznym. Nagrywanie Wciśnij przycisk [RECORD], aby wejść w tryb nagrywania. Zagraj sekwencję nut na klawiaturze, aby je zapisać.
Rozwiązywanie problemów Problem Możliwa przyczyna/Rozwiązanie Podczas włączania lub wyłączania zasilania To normalne. Nie ma się czym martwić. słychać jakiś cichy dźwięk. Po włączeniu zasilania instrumentu nie Sprawdź czy ogólny poziom dźwięku jest ustawiony słychać żadnych dźwięków przy naciskaniu właściwie. Sprawdź czy do instrumentu nie są klawiszy.
Przepisy FCC (Część 15, Klasa B) Niniejsze urządzenie spełnia wymogi określone w Części 15 przepisów Federalnej Komisji Łączności (FCC). Jego eksploatacja podlega następującym warunkom: • Urządzenie to nie może powodować szkodliwych zakłóceń. • Urządzenie musi przyjmować odbierane zakłócenia, w tym zakłócenia mogące powodować niepożądane działanie.