Design Nanoleaf 4D Bedienungsanleitung Seite 3

Step 1: Setup
Skip to Step C if you have the Screen Mirror Kit (Camera Only)
A. Wipe the back of your screen to ensure it is dry and clean.
OPTIONAL use the tape provided
back of the screen (at least I" away from the edgel
C. Place the camera abcwe the screen using the included
on a surface below the screen without
with tape it desiredh
attach corner brackets to the
mount QR
the mount (secure to surface
B. Adhere the lightst'ip
orcwnd comer brackets, if usedl
D. Connect the lightstrip and camera
(secure to the back ot ycwr screen with tape if desired). ard glug in
to power
the back ot your screen (bending
cables into the Contuzller