TW resolve 2 Bedienungsanleitung Seite 3

Using your Resolve 2
Assembly:
To assemble the device, firstly, screw
the atomizer head into the atomizer
base tightly to ensure an effective
seal. The atomizer base must then
be screwed into the atomizer tube
and the mouthpiece attached. Finally,
screw the liquid tank onto the Battery.
Filling the Tank:
To fill the tank with e-liquid, firstly,
invert the tank, unscrew the atomizer
base from the atomizer tube and
slowly fill the tube with e-liquid by
TW Resolve2 Compliant Manual.indd 3
inserting the nozzle into one of the
two filling holes. Screw the atomizer
base back onto the atomizer tube.
Maximum refill nozzle diameter:
2.8mm.
Note: Do not overfill the tank, for
best results fill the tank to between
10%-90% capacity. When first using
an atomizer, to ensure the best
performance and longevity, drip a
few drops of e-liquid into the wicking
material of the atomizer to ensure
that it is saturated before vaping.
3
08/11/2016 13:20