Werbung
OBSTACLE AVOIDANCE MODE
If an obstacle is sensed 0.5-1 meters after entering obstacle avoidance, it will stop moving in the
direction of the obstacle. Obstacle avoidance can only recognize light-colored objects, but dark,
black, and transparent objects cannot be recognized. The obstacle avoidance function is only
recommended for indoor use.
It is recommended to turn on the obstacle avoidance function in an indoor flight environment
with a length and width of 6 x 6 meters or more. When the UAV turns on the obstacle avoidance
mode, the speed will slow down and the fast gear cannot be turned on. Therefore, it is recom-
mended to fly indoors when the obstacle avoidance mode is turned on.
FLIPS & ROLLS
When the drone is reaching more than 3 metershigh, click "360º flips and rolls" and move
theright joystick to a certain direction, the drone will rotate in that direction.
Right joystick
Flip to left
Headless Mode
The flight direction of drone is subjected to the direction of remote control.
1.
When drone adjust the frequency, the drone is default as common mode. Then the
indication light of drone is normally on. When you press the headless function key of
remote control, the remote control beeps once and enters headless state. When you press
the headless function key again, you listen to a beep sound and the drone exits the
headless mode.
2.
In the headless state, operator doesn't need to identify the direction of nose, but control
the drone according to the operating lever of remote control.
Hover
When you release the left joystick (thrittle) after the ascent/descent action the drone will hover
at a certain height
Left joystick
Flip to right
20
Werbung
