EN
Package Content
Home speaker x 1
USB-C charging cable x 1
User manual x 1
Product Overview
1.
Long press to turn ON/OFF.
M
2.
Press to switch modes between Bluetooth, Aux in and TF card Mode.
Press and hold to enter into TWS mode.
3.LED lights from le� to right :Bluetooth mode; Aux in mode; TF card mode;
Ba�ery status.
4.Volume control:
5.
Press to track back.
6.
Press to play/pause; Press to connect the last connected device.
Long press to disconnect Bluetooth .
7.
Press to track forward.
Note:
Press and hold the
*
(While Bluetooth disconnec�ng)
Press and hold the
*
Press and hold the
*
8. Power input: DC 5V 2A
9. LED charging light:
Charging: steady red
Fully charged: light off
10. AUX in: Play via 3.5mm Auxiliary cable(not supplied)
11.TF card audio format: MP3, WAV, FLAC, APE (Max capacity 256G) /
play in download order
Status Indicators
LED lights on
the top
Ba�ery LED
Pairing DOSS SoundBox XL with Your Device
1.Place the speaker and the device within one meter.
2.Turn on the speaker and make sure the LED on the top is flashing blue, if
it's steady blue, long press play/pause bu�on for 5 seconds.
3.Turn on Bluetooth on your device, and choose DOSS SoundBox XL on the
Bluetooth list.
4.Once paired, you will hear a prompt tone and the LED on the top will
change to steady blue. If the pairing failed, please repeat steps 1
through 3 again.
1
2
4
3
Press to turn down;
simultaneously to check version ID
to restore factory se�ng.
to cancel/ac�ve the prompt tone
DC 5V 2A
8 910 11
①Flashing blue
①Steady blue
②Steady red
③Steady green
③Flashing green
④Flashing red
Steady red
Light off
5
6
7
Press to turn up.
Bluetooth pairing
Bluetooth connected
Aux in mode
TF card mode
Maximum volume
low Ba�ery
Charging
Fully charged