Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
Inaccurate pool
temperature
readings
on the receiver
If the receiver or pool
thermometer shows
HH.H. or LL.L.
The pool thermome-
ter does not show a
reading for more
than 15 minutes, or
suddenly does not
show.
Possible Solution
When the temperature is inaccurate, it
is often due to overpowered/under
powered batteries. You can test the
accuracy at you home.Side-by-side
test: Bring the pool thermometer in the
house and place it next to the receiver
for 2 hours.
Indicates that the temperature exceeds
the minimum and maximum tempera-
ture range, our temperature range is 14
℉ ~ 122℉ (-9.9℃ ~ 50℃), in this case
please try to replace the battery, or
contact us for device replacement.
1. replace the battery, pay attention to
the polarity.
2. need to check whether the pool
thermometer is tightened, if it has
been in the water, please contact us
for replacement.
- 06 -
Werbung
