Tronios max music Rhapsody49 Bedienungsanleitung Seite 4

13. INTRO/ENDING
Press the [INTRO/ENDING] button before Rhythm is started, the keyboard will perform a length of relative intro, then returns
back to relative normal Rhythm. Press the [INTRO/ENDING] button after Rhythm is started, the keyboard will perform a
relative ending to stop.
14. SINGLE CHORD
When style is started, press the [SINGLE CHORD] button to enter the function of single finger auto chord. "Sin" shows on
the display, Play any key in the chord key zone (the 1st-19th key, from left). Press the [SINGLE CHORD] button again,
"OFF" will appear on the display. The single chord function will be disenabled.
15. FINGER CHORD
Press the [FINGER CHORD] button. After the "Fin" shows on the display, you can play a fingered chord on the keys in the
chord zone of the keyboard. Press the [FINGER CHORD] button again, "OFF" will appear on the display. The fingered chord
function will be disenabled.
16. ACCOMP VOLUME
There are 16 levels (0-15) of Rhythm volume. The default level of Rhythm volume is 013. Press [˄] or [˅] button to adjust
the Rhythm volume. The selected volume will be shown at the display.
17. TEMPO
Press the [TEMPO] [˄] or [˅] button to increase or decrease the tempo value for Rhythm, Metronome and demo song.
There are 210 tempo value among the range of tempo value from 30-240 beats per minute. Press the [˄] or [˅] buttons
simultaneously to return to default status at 96 tempo value.
18. SUSTAIN
Press the [SUSTAIN] button, the sustain can add slow, naturel decay to the tone. It can make tone effect of some musical
instruments to be more vivid. Press the [SUSTAIN] button again to exit this function.
19. VIBRATO
Press the [VIBRATO] button, the vibrato effect will be produced by pressing the black/white keys. Press the [VIBRATO]
button again to exit this function.
20. TRANSPOSE
Press the [TRANSPOSE ˄ or ˅] button to increase or decrease the transpose value up and down +/- 6 levels and shift the
pitch of entire keyboard up and down in semitone intervals. Press the [TRANSPOSE ˄ or ˅] simultaneously to return to
default status of keyboard tone.
21. RECORD
Press the [REC] button to enable the recording function, "rEC" will show on the display. Then press any key or sound of
drums to start recording. The recording will be automatically ended while record is full and "Ful" is shown on LED display. All
previous record will be automatically cleared while recording a new one. Press the [PLAY] button to play the tones you
recorded.
22. PLAY
Press the [PLAY] button to playback recorded notes or rhythms.
23. NUM-PAD
Numeric keys to enter an accurate value.
24. [<] / [>]
25. USB POWER INPUT
Input for connecting an USB-C cable to power the keyboard or connecting the
keyboard to a computer.
26. PEDAL
Sustain pedal jack for connecting a sustain pedal.
27. PHONES/OUTPUT JACK
Output jack for connecting a pair of headphones or audio equipment.
CONNECTIONS
Headphones/output:
When connecting headphones to the PHONES/OUTPUT port, the loudspeaker will be disenabled automatically. You can
perform without disturbing others and others disturbing you.
Connecting a sustain pedal:
An optional foot switch or a pedal can be plugged into the sustain jack and be used to switch sustain on or off.
Connecting a computer:
Use a standard USB cable to connect the USB jack of the instrument to the USB port of a computer. You can transmit MIDI
messages between the instrument and the computer.
Notes:
1. Do not set the USB device to be input and output simultaneously when setting the software on the computer. Otherwise, the
sound will be overlapped when playing the keyboard.
2. We recommend using a USB 2.0 interface to connect the instrument to the computer.
4