I-Rocks RF-7550A Bedienungsanleitung Seite 6

RF 2.4GHz Digital Cordless
ID Setting
Each cordless mouse has to get an ID from a specific
start working, it also called ID Setting. The ID-Setting helps to protect
against interference from other cordless mouse in the same environment
Please follow below
process for your cordless mouse and USB dongle receiver.
1. Make sure the mouse hardware installation is completed
2. Turn your cordless mouse on.
3. Turn your Notebook or PC computer on.
4. Plug the USB dongle receiver into your computer's
5. Waiting for the USB plug and play initialization completed, and the dongle
receiver LED will light flush.
6. Move your cordless
30 cm, then click the mouse left button to start ID-Paring process.
(It will take about 4—8seconds waiting time)
7. Once the ID-Setting process is completed, the receiver LED will light
off. The receiver LED will light on again when cordless mouse is working.
8. If the mouse doesn't work properly (the receiver LED still light flush),
please remove the USB dongle receiver from computer's
then repeat do step 4 to step 7 again.
9. Enjoy using your cordless mouse.
Optical Mouse
steps to complete
mouse close to the USB dongle receiver within
receiver before
the necessary ID-Setting
USB port.
USB port,