Battery Replacement - Rexer Rx4026L Benutzerhandbuch

User Manual
WARNING
- Read this manual carefully and keep it for future reference
- Although the battery has been charged by the manufacturer, the level may have decreased. Charging for a
full day is encouraged to optimize performance
- Charge at least every three months to maintain optimal battery life
- This product operates on 230V~ / 50Hz current
- Clean only with a dry cloth
- Do not expose the device to direct exposure of rain or splashes of water or other liquids
- Keep the fixture out of the reach of children
- Do not stare at lamp LEDs as direct and prolonged exposure may cause damage to eyesight
- Contact only qualified service centers for maintenance and/or repairs
RECHARGE
Insert the plug of the power cord (included) to the relevant socket on the side of the lamp and the plug into
a 230V~ power outlet. The LED indicator will light up during charging
Insert a 12.0V car cigarette lighter adapter cable (not included) to the relevant socket on the side of the
lamp. The LED indicator will light up during charging
MODE OF USE
The switch has 3 positions:
- High intensity (autonomy 2 hours)
- OFF
- Low intensity (autonomy 50 hours)
Note - For Anti Black-out function, the switch must not be in the OFF position and the lamp must be
connected to a power source

BATTERY REPLACEMENT

Contact qualified technicians or Service Centers.