Snakebyte Kids Tab f2 Bedienungsanleitung Seite 39

DE EN
SETTINGS
Touch the gear icon to open the Settings.
WLAN (Wi-Fi) Settings
Note: Make sure that you are in the Wi-Fi zone and are connected to the network
to access the Internet.
Slide the Wi-Fi switch to the ON-Position to enable wireless connection to the
internet.
If the local networks show this sign
it means that you don't need a password
and can directly connect to the Internet.
This sign
means that the network is encrypted, and you must enter a pass-
word before you can connect to the Internet.
You can select the desired network by tapping it with your finger. Enter the pass-
word if required, and you will be connected.
Tapping on Advanced features allows you to view the IP and MAC addresses.
Note: When you enter a Wi-Fi password, we recommend displaying the password
to see which characters you are entering.
Connection to the PC via USB
Connect the USB cable to your PC and the device. After the connection is establis-
hed, press the USB icon
on the top of the screen and drag your finger down to
open the USB menu. Follow the on-screen instructions to exchange data between
your PC and the tablet.
39