Unpacking The Product - Proregal Rho135 Bedienungsanleitung

1.7 Sicherheitshinweise
WARNING
Risk of injury from falling objects or the shelf tipping
over and collapsing.
Falling parts can cause serious injuries, especially to
the head area.
Distribute the load evenly across the storage
surface. The shelf is not suitable for point loads or
dynamic loads, such as heavy items with a small
base area or items stored hanging.
Never exceed the maximum allowable load weight
per level. Never exceed the total maximum
allowable load weight of the product.
Store heavy items on the lowest level.
Secure any items that do not have a stable base to
prevent rolling.
Never climb on the product.
CAUTION
Risk of cuts and pinching. During assembly of the
product, there is a risk of cuts to the hands and
arms.
Wear standard protective gloves during unpacking,
assembly, and transportation of the product.
Transport the product only in an unladen state.
Transport and assemble the product with at least
one other person.
CAUTION
Verletzungsgefahr und Sachschaden.
Risk of injury and property damage.
Modifying the product may lead to injuries and
property damage.
Use the product only with the original parts
provided and in its original condition.
Only use replacement and accessory parts
approved by the manufacturer.
Hergestellt für Procommerce Group GmbH - Am Kreutweg 1 - 97204 Höchberg - Germany
2. Unpack and check

2.1 Unpacking the product

WARNING
Choking hazard due to packaging material and
swallowing small parts.
Dispose of
immediately in the household waste in
accordance with the regulations.
Keep the packaging and small parts required
for repackaging away from moisture and out
of the reach of children.
ATTENTION
Material damage.
Pointed, sharp and scratching objects can damage
the product when opening the packaging.
Do not use sharp, pointed, or abrasive objects to
open the packaging.
Perform the following steps carefully.
1. Remove adhesive and securing tapes by hand or use
scissors.
2. Place the carton with the direction arrows pointing
upward.
3. Open the packaging box.
4. Take all parts out of the box.
5. Lay the parts side by side on a clean, soft, and flat surface.
6. Check the contents for completeness and integrity.
7. Read the user and assembly instructions!
2.2 Check the contents of the delivery.
ATTENTION
Property damage.
Using the product with missing or defective parts
may damage the product.
Do not use the product if it is incompletely
assembled or with defective parts.
Check the contents for completeness and
integrity.
the packaging material
EN