Bergstrom M939 Bedienungsanleitung

Star Projection Clock
Item No:
M939 / 629670
Instructions for Use
Please read and retain these instructions for future reference
Power Details:
Battery Type & details:3xAAA battery Not included
Voltage details: 1.5V
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new STAR PROJECTION CLOCK.
User Instructions here
Operating Instructions for Music Starry Sky Perpetual Calendar
Functions of the Product
Display of perpetual calendar (2000-2099), time, date and week
Thermometer: Shift between Centigrade temperature and Fahrenheit temperature(0C-50℃,32F-122F)
Shift between 12-hour and 24-hour modes.
Alarm of chords/natural sounds
Function of snooze
Function of countdown (timing from 00-00:00-23:50:59 hours) Function of timed music appreciation
Music appreciation mode
Dynamic projection of coloured starry sky accompanied with music rhythms.
Backlight function.
Time mode:
When the product is powered on, the time initially displayed is 12:00 AM in 12-hour system, and the initial date is
January 1(initial year is 2011). Temperature value is displayed as per Celsius degree, and the functions including alarm
clock and snooze are disabled
Setting of time, date, month, and year
1.In the time mode, push the key SET to access time setting, and hour starts flashing. Push the key UP or DOWN to adjust
time and push the key SET repeatedly and the key UP or DOWN to adjust minute, year, month, and date before returning
to normal display of time (weekday will change automatically accordingly to the date set). To exit setting mode, push the
key Mode once or do not push any key for 30 seconds.
Shift between 12-hour and 24-hour modes:
2.In the Time mode, push the key UP to shift between12-hour and 24-hour modes.
Functions of alarm clock and snooze:
1, In the normal time mode, push the key MODE to access the alarm ring function with display of ALARM. Push the key
UP or DOWN to enable functions of alarm ring and snooze and push it again to disable the functions.
Marks displayed are (-) for alarm ring and Zz for snooze. In normal time, if alarm ring or snooze are not displayed this
indicates that these are disabled. If these are not enabled the alarm will not sound when reaching the set time. If only
v001: 03/06/24
ENGLISH INSTRUCTIONS
PHOTO OF PRODUCT HERE