Werbung
2
Installation
Note:
• •
It is recommended to install the RoomSensor Pro at a height less than 3 meters from
It is recommended to install the RoomSensor Pro at a height less than 3 meters from
the ground.
the ground.
• •
It is recommended to install it directly above the center of the meeting room table
It is recommended to install it directly above the center of the meeting room table
during installation.
during installation.
• •
Please wipe the ceiling at the respective location with a dry paper towel before instal-
Please wipe the ceiling at the respective location with a dry paper towel before instal-
lation.
lation.
1
Glue locating sticker
2
Install the stand
Install using 3M tape
Suitable for all ceilings.
3M Tape
Stand
！
2
Please adhere to the ceiling
according to the text instruc-
tions on the stickers based
on the actual environment.
If you want to route the
wiring through the wall,
please make a hole for
threading here.
Werbung
