Safe 9853 Bedienungsanleitung Seite 2

SAFE 9853 Mini scale
500g / 0.01g
Instructions
Place the scale on a flat, horizontal surface
• 1. Press the middle button "ON"
• 2. Wait until 0.0 appears on the display.
• 3. Place the object to be weighed on the weighing surface.
• 4. The weight unit can be selected by pressing the "M" button.
Tare function
• 1. Switch on the scale as above
• 2. Place the tare weight on the surface
• 3. Press the "T" button and wait until 0.0 appears on the
display.
• 4. Place the object to be weighed on the scale.
Calibration (only calibrate if there are problems)
• 1. Press ON/OFF.
• 2. Briefly press the middle button, then press and hold "M" until CAL
appears. Release the "M" button.
• 3. Press "M" again, CAL and 150 will now appear on the display.
• 4. Place a 150 g weight on the scale and wait 3-4 seconds until 150
appears on the display (PASS).
• 5. Remove the weight, switch off the scale, calibration is complete.