Werbung
Instructions Guide
EN
DAB/DAB+ Radio
Fully extend the pigtail antenna (Ref.14) to ensure that the best signal can be received
before scanning.
From the 'Welcome' screen, your radio will automatically scan for DAB stations.
If the unit has not automatically scanned or if you would like to rescan the available
stations, press the 'Menu/Mode' button (Ref.2) to enter radio 'Menu' option. Press
either the 'Prev' or the 'Next' (Ref.9/11) buttons to find and select 'SCAN'. Press the
'Enter' button (Ref.13) to confirm and start scanning.
Note: The date and time displayed on the DAB radio stations is also synchronised with
the radio stations found.
If you find your favourite radio stations with bad reception/signal, we recommend
repeating this procedure. By selecting 'Scan' option, the radio will automatically search
for available radio stations with best reception on the radio frequency band up and
store all with good reception.
As soon as the full scan has been completed, the radio will automatically start playing
at the first stored radio station.
To select a different radio station, use the 'Prev' or the 'Next' buttons (Ref.9/11) to find
your desired station. Select the station by clicking the 'Enter' (Ref.13) button.
Note: DAB mode is not indicated by displaying 'DAB' on the radio screen. The first
available station will be displayed with rolling information text.
DAB/DAB+ Radio Settings
In DAB Mode, press the MENU button (Ref.2) to enter the radio settings. Use the
'Prev/Next' buttons to scroll through the following options:
Scan: Select this option to initiate a scan for available stations. Whilst scanning, the
screen will show 'Scanning' along with the number of stations that have been found.
Manual Tune: Select this option to browse through available stations by multiplex and
frequency.
DRC (Dynamic Range Compression): Select this option to reduce the volume of louder
sounds and boost the volume of quieter sounds. Select 'High', 'Low' or' Off'. Confirm
your selection by pressing the 'Enter' button (Ref.13).
Prune: 'PRUNE' is a DAB feature which can help to remove found stations that are
listed, but no longer available. Using the 'Prev/Next' buttons, highlight 'Prune Yes' ('Y')
to activate this feature or 'Prune No' ('N') to deactivate. Press the 'Enter' button
(Ref.13) to confirm.
System: Enter to access the radio system settings described on page 18.
7
Werbung
