Tcr Mode - Bypass Mode - Innogigs Evic Vtwo Set Bedienungsanleitung

INNOCIGS EVIC VTWO SET – EXPLANATIONS TO THE VAPING MODES
TCR mode (Temperature Coefficient of Resistance)
In TCR mode (M1, M2, M3), the device can support different temperature control coils with resistances
between 0.05 ohm and 1.5 ohm within different TCR value ranges. You can set the TCR at different
values within proper range. The vaping temperature can be adjusted – according to the used coil – in a
range between 200°F and 600°F.
Bypass mode
Direct output voltage system is applied in Bypass mode: the higher the battery level, the higher the
output voltage. When set in this mode, the device can support a coil whose resistance is within the
range of 0.1 ohm and 3.5 ohm.
46