Kress KA2283 Bedienungsanleitung Seite 9

vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ASSEMBLY & OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY
Connecting (See Fig. A)
Remove the existing attachment and connect the
edger attachment. Slip the attachment into the shaft
of the main unit and secure in place with the locking
knob.
OPERATION
Starting (See Fig.B)
Press the lock-off button first, then press the switch
trigger to start the machine.
Adjusting the depth (See Fig.C1,C2)
Loosening the adjusting knob and move the wheel
arm up to increase the depth or down to decrease the
depth according to your work needs.After adjustment
is complete, tighten the adjusting knob securely.
NOTE: Stop the motor and remove the battery pack
before adjusting the depth of cut.
OPERATION TIPS
1. The edger will edge among sidewalks,
driveways, flower-beds, curbs, and similar
areas.
2. Cut at a steady pace. If the blade begins to bog
down, you are edging too fast; slow your pace.
Do not force the blade into ground.
3. Light contact of the blade against the sidewalk
edge, curb, and so on, is acceptable and will
not do damage to the edger.
4. Best performance will be obtained when
grass is dry. Avoid edging in wet soil or wet
grass areas or the blade guard might clog and
result in an uneven edge. If the blade guard is
clogged, stop the machine, remove the battery
pack, then remove debris from the blade guard.
MAINTENANCE
Remove the battery from edger attachment
before carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0 ℃-45 ℃.
The recommended ambient temperature range for
the charging system during charging is 5 ℃-40 ℃.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product
Battery operated lawn edger
Description
Type KA2283 (2283-designation of
machinery, representative of Battery operated
lawn edger)
Function trimming grass edges
Complies with the following Directives:
2006/42/EC,2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per
- Measured Sound Power Level
- Declared Guaranteed Sound Power Level
98 dB (A)
Standards conform to
EN 62841-1,ISO 11789
EN ISO 3744, EN IEC 55014-1,EN IEC 55014-2,
EN IEC 63000
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2023/11/16
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
9
EN
Annex V
95.6 dB (A)