CMP HT2178 Bedienungsanleitung Seite 11

8. Tap 'I Heard a Prompt' when you hear a prompt sound. The HD Smart Wi-Fi Camera is trying to connect to the
App. Once connected successful, the App will show 'Added successfully' & 'Security Camera Device added
successfully' with a voice message 'camera online'.
9. Tap 'Done' to view the live stream of your camera.
Storage Settings, Remove Device...etc.
Note: Micro SD Card (not included) will perform Event Recording or Non-Stop Recording. Upon reaching its maximum
storage capacity, it will automatically record over the oldest recording. This will erase the oldest recording, and replace
it with the new recording. For longer access to important recordings, it is recommended to move the recordings from
the Micro SD card to your computer etc. Recorded videos can be seen under the Playback icon.
Detection Alarm Settings: Tap on "Detection Alarm Settings" can then turn on/off the Motion Detection Alarm. Once
this is turned on, if any motion is detected you will get notification. Notifications can be checked on the "Message" tab
of the App. Motion Alarm Sensitivity Level can be set:
Low Sensitivity – Records any movements within 5 meters

Medium Sensitivity – Records any movements within 10 meters

High Sensitivity – Records any movements within 15 meters

Remove Device: Tap on "Remove Device" if you'd like to delete this camera.
Warnings while using product:
Take care not to open, modify or take apart the device. Taking the product apart may cause the risk of electric shock or
fire. In the event of product malfunction, take your device to a specialist technician.
Keep the device protected from rain, water or moisture when in use.
Cleaning and storage:
Clean the device using a soft, dry cloth.
Do not use abrasive cleaning solvents to clean the camera.