Intended Use; Before Use - Rebel Active Rba-6006 Bedienungsanleitung

• ALWAYS disconnect the product form the power mains when it is
not in use.
• Motor is located inside the leather cover of the massager. Do not
unzip the cover and reach inside to avoid motor damage.

INTENDED USE

This device is designed for massaging the feet, calves, thighs and
forearms of human body. It cannot replace medical treatment. Do not
use the massager if one or several of the following applies to you. If
you are unsure whether the massager is suitable for you, please
consult your doctor.
Do not use the massager:
• continuously for a long time to prevent muscle pain caused by
excessive massage,
• during sleep to prevent long-term stimulation to a certain part from
affecting health,
• when driving,
• if you have undergone surgery on the massaged part or have skin
damage, redness, inflammation, congestion and other symptoms,
• if you suffer from heart disease, acute disease, skin disease,
malignant tumor, have bleeding tendency and other blood
diseases, osteoporosis, soft tissue diseases, stroke and other
physical abnormalities,
• if you are pregnant or during menstrual period. If you need to use
it, please follow the doctor's advice.

BEFORE USE

• Before use, please remove jewelry from the massaged part or
other items that may affect the massage.
• Adopt a comfortable posture and completely relax your body.
• Place feet, calves, thighs or forearms in the massager and adjust it
to the most comfortable position.
EN
10
OPERATION
Connection: Connect the DC plug of the AC adapter to the DC socket
of the device; connect the other end to the power outlet. OFF flashes
on the display.
Turn on/off: To turn on the device, press the
By default heating function is off, the intensity is set to medium, timer
is set to 10 minutes.
Turn off the device by pressing the same button. OFF flashes on the
display and then the display goes off.
Massage: When the device is on, press the MASSAGE button to turn
on the massage (C1 appears on the display). Press the same button
again to turn off the massage (C0 appears on the display).
Mode: Keep pressing the MODE button to set one of three massage modes:
• AU – massage heads rotate alternately, inwards and outwards
• A1 – massage heads rotate inwards
• A2 – massage heads rotate outwards
Rotation direction (only in the massage mode): Press the ROTATION
button to set the rotation direction: C1 – heads rotate inwards, C2 –
heads rotate outwards.
Heating function: Keep pressing the HEATING button to set the
heating level (off by default). There are three available levels- E1 (low
temperature), E2 (medium temperature), E3 (high temperature). When
E0 appears on the display, the heating function is off.
Intensity level: Press the INTENSITY +/- buttons to set the intensity
level. There are three available settings- L1 (low intensity), L2 (medium
intensity), L3 (high intensity).
Timer: Keep pressing the TIMER button to set the timer. There are
three available settings: 10, 20 and 30 minutes. Set time will appear
on the display. The device will operate for the time set and then it will
automatically turn off.
button. Massage starts.
11
EN