CMP HT0119 Bedienungsanleitung Seite 5

Setting the brightness
Quick press:
On SNOOZE
Max. brightness
by default
Setting the projection brightness
Max. brightness
by default
Battery replacement:
Before use: Remove the plastic protective tab located in the battery compartment.
The memory function uses 1 CR2032, 3.0 V⎓ battery, included.
Installing and replacing the battery:
Remove the battery cover by applying pressure. Remove the old battery and replace it with a CR2032, 3.0 V⎓
battery, noting the correct polarity. Replace the battery cover exactly as it was.
Warnings for use:
The batteries should not be recharged. Batteries should be removed from the product before charging.
Different types of batteries or new and old batteries should not be mixed. The batteries should be installed
with care taken to respect the polarity. Old batteries should be removed from the device. The terminals on a
battery or rechargeable battery must not be placed in a short-circuit. Keep the batteries out of reach of
children.
Published by Groupe CMP - 157, avenue Charles Floquet – Bât. 4C/4D - 93150 Le Blanc-Mesnil – France
Quick press:
On SNOOZE
Medium
brightness
Quick press:
On PROJECT
Low
brightness
This product is electrical and electronic equipment waste, which is harmful to the
environment and to human health. It must not be disposed of with your
household rubbish. Find out from your local authorities about the availability of
recycling.
Batteries and rechargeable batteries are collected separately.
Complies with requirements stated by the community regulator
For indoor use only
Class III equipment
Direct current (DC)
www.cmp-paris.com
Quick press:
On SNOOZE
Low
Brightness
brightness
Quick press:
On PROJECT
Brightness
OFF
- Made in China
Quick press:
On SNOOZE
Return to max.
OFF brightness
Quick press:
On PROJECT
Return to max.
brightness