General Guidelines - Songmics Let286 Montageanleitung

EN
General
Guidelines
Please read the following instruction carefully and
use the product accordingly.
Please keep this manual and hand it over when
you transfer the product.
This summary may not include every detail of all
variations and considered steps. Please contact us
when further information and help are needed.
Warnings
Children are not allowed to assemble the product.
During assembly, keep all any small parts out of
the reach of children as they may be fatal if
swallowed or inhaled.
Children are forbidden to climb or play on the
product to avoid serious bodily injury caused by
the toppling.
Keep plastic packing bags out of reach of children
to avoid any potential danger, such as suffocation.
WARNING - Delicate table - Do not sit on the
product;
WARNING - Delicate table - Do not place heavy
objects on this product, manufacturers maximum
load is 20 kg (44 lb).
Notes
The product is intended for indoor use only. The product must be assembled
and used in accordance with the provisions of the manual. Personal injury
and/or damage to product may occur if products are used outside of their
intended purposes and/or if products have been changed/modified from their
original design. The seller does not assume any responsibility or liability with
respect to any injury/damage caused by incorrect assembly or improper use.
Avoid long-term exposure to humid environments to prevent mildew.
Keep the product away from fire sources and high temperatures. Do not expose
the product to direct sunlight.
Do not place any hot objects on the surface of the product.
If there are any defective or missing parts after unpacking, please cease
assembly immediately and contact us.
Please assemble the item on a spacious surface and do not place the
unwrapped product directly on the ground to avoid product damage.
Please do not stand or sit on the wooden boards.
Please wear gloves during the assembly and/or disassembly process to avoid
scratches from any sharp edges.
Please match the corresponding part and fitting based on the part number in
the manual.
If the part does not match with the fitting, please check the piece as specified in
this manual.
During assembly, first loosely align all screws with the corresponding pre-drilled
holes and then tighten the screws one by one.
Periodically inspect screw tightness while the product is in use. If necessary,
retighten to ensure structural integrity.
If you accidentally spill water or another liquid on the surface, immediately wipe
clean with a dry towel.
Please keep the product away from sharp, pointed objects and corrosive
substances to prevent product damage.
Please place this item on level, solid ground during use.
7