NOtools are required to install it, and you can simply place or stick it almost anywhere. • A hub is required Aqara Hub is required to enable Agara Motion Sensor to work With HorneKit technologi/ See WWWzqaraC-om Ior more details This product is for indoor use only.
Quick Setup 1. Please add the Hub to the app according to the Hub Quick Start Guide 2. Please remove the battery insulation tab before use. 3. Please open the app, tap "Home" and then tap "+" in the top right corner to enter "Add Device (Accessory)" page.
Seite 4
Option 2: Remove the protective film (the round sticker is in the box), and stick it to the desired position. Remove the protective film Stick it to the desired position Option 3: Stick the Motion Sensor to the stand, and stick the stand to where you need it.
Seite 5
Single press the reset button on the accessory. If the Hub makes voice prompts and the related accessory icon in the app blinks, it indicates that the accessory is identified. • Only Aqara Home app and Agara app support this functiorm...
Seite 6
Maximum Detection Angle: 170' Operating Temperature: -100—+45' C Operating Humidity: O— 95% RH, no condensation Online Customer Service: www.aqara.com/support Email: support@aqaracom Manufacturer: Lumi United Technology co., Ltd Address: 8th Floor, JinQi Wisdom Valley, No. 1 Tangling Road, Liuxian Ave, Taoyuan Residential...
Seite 19
überall anbringen Oder ankleben • Ein hub ist ertorderlicm • Damit dieses Gerät mit der HomeKit-TechnoIogie zusammenarbeiten kann. ist ein Aqara-Hub erfordedich. Weitere Einzelheiten sighe aqaracom • Dieses Gerät ist nur für Verwendung in Innenräumen bestimmt...
Rücksetztaste Anzeigelampe 3s gedrückt halten: erneut verbinden Einmal drücken: Test der Fresnel-Linse wirksamen Reichweite Isolierlasche Stander Schnelleinrichtung 1_Bitte fügen Sie den Hub entsprechend der Hub- Schnellstartanleitung zur App hinzu. 2. Bitte entfernen Sie vor der Verwendung die Batterie- Isolierlasche. 3. Bitte öffnen Sie die App, tippen Sie auf „Home" (Haus) und dann auf „+"...
Seite 21
Montage Test der wirksamen Reichweite: Drücken einmal Rücksetztaste Zubehörgeräts dessen gewünschtem Standort_Wenn der Hub Töne von sich gibt, bedeutet dies, dass das Zubehör mit dem Hub korrekt kommunizieren kann. • Vermeiden Sie die Nähe von Metalloberflächen, um die Signalstärke manneren. Option 1: Platzieren Sie den Bewegungssensor dorthin,...
Seite 22
Kleben Sie den Bewegungssensor Entfernen Sie die Schutzfolie an die gewünschte Stelle Option 3: Kleben Sie den Bewegungssensor auf den Ständer und kleben Sie dann den Stander an die erforderliche Stelle. • Halton Sie die Obertlächen sauber und trockerm • Die empfohlene Montagehöhe beträgt m bis...
Seite 23
Wirksamer Erfassungsbereich — Seitenansicht • Beachten Sie, dass die Linse bei der Montage am Erfassungsbereich ausgerichtet und so nahe Wie moglich an den Rand eines TISChes Oder Schranks platziert Oder geklebt werden sollte_ Wirksamer Erfassungsbereich —Draufsicht Erkennen eines Zubehörgeräts: Offnen Sie die App und gehen Seite „Device...
Zubehörgerät erkannt wurde • Diese Funktion Wird nur von den Apps Aqara Home und Aqara unterstützt Spezifikationen Modell: RTCGQIILM Abmessungen: 30 x 30 x 33 mm (1 ,18 x 1,18 x 1,30 Zoll) Drahtloses Protokoll: Zigbee...