CO/Tech 51058GBx2 Bedienungsanleitung

Dimmer Switch Receiver
Art.no 18-1254 Model 51058GBx2
36-6009 51058x2
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our
Customer Services.
Operating instructions
Installation
1. Plug the receiver into 2. Hold in the button on the front
an electrical outlet. of the receiver for at least
3 seconds and then release it.
3. The LED button will start flashing
slowly. The receiver is now
ready to be paired with a remote
control.
4. Press one of the on-buttons
on the remote control once (if it
has more than one on-button).
The LED on the receiver will
shine steadily when the remote
control has been paired. Up to
6 remote controls can be paired
with the receiver.
5. Connect a light to the receiver
and check that the light is
switched on.
Tip: The light can also be switched
on/off manually by pressing
the button on the receiver.
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
Dimming the light
The light can be dimmed using the paired remote control. This is how
to do it:
Press the on-button on the remote control twice in quick succession
to cause the light to alternately increase and decrease. Press the on-
button once more when the desired light level has been reached.
Switching the light on/off
Switch the light on/off using the on and off buttons. The light comes
on at the latest light level setting when the on-button is pressed.
If you wish to set a new light level once the light is switched on, press
the on-button on the remote control again. Press the on-button once
more when the desired light level has been reached.
Deleting a paired remote control
Up to 6 remote controls can be stored in the memory of the receiver.
If you wish to pair a remote control when six remote controls
are already paired with the receiver, you must first delete one of
the existing remote controls:
1. Hold in the button on the front of the receiver you wish to delete
for 3 seconds and then release it.
2. The LED button will start flashing slowly. The receiver is now ready
to delete the remote control.
3. Press in the off-button on the remote control (make sure to
choose the correct off-button if the remote control can connect
to multiple receivers). The remote control will now be deleted from
the receiver.
Deleting all paired remote controls
1. Hold in the button on
the front of the receiver for
6 seconds until the LED
button starts flashing
quickly.
2. When the LED stops
flashing, all the remote
controls which were paired
with the receiver will have
been deleted.
Care and maintenance
• The receiver should be unplugged from the wall socket if it is not
to be used for a long time.
• The receiver should be cleaned by wiping it with a dry cloth.
Troubleshooting guide
The receiver • Has the receiver been paired with a remote
is not control as described above? Try pairing
working, them again.
the LED is • Check that the light is properly plugged into
not lit. the receiver and that it is switched on and not
faulty.
• Try plugging the light into another electrical
outlet to make sure that it works.
• Is there electricity in the outlet the receiver is
plugged into?
Responsible disposal
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused
by incorrect waste disposal, the product must be
handed in for recycling so that the material can be
disposed of in a responsible manner. When recycling
your product, take it to your local collection facility or
contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound
manner.
Specifications
18-1254
Supply voltage 220–240 V, 50 Hz
Frequency 433.92 MHz
Max range 25 m
Max load
Incandescent and halogen bulbs (230 V) Max 200 W
Dimmable CFL bulbs (230 V) Max 200 W
Dimmable LED bulbs (230 V) Max 3–24 W
36-6009
Supply voltage 230 V, 50 Hz
Frequency 433.92 MHz
Max range 25 m
Max load
Incandescent and halogen bulbs Max 200 W
Dimmable CFL bulbs Max 200 W
Dimmable 230 V LED bulbs Max 3–24 W