Unpacking The Product - Proregal Rd6 Bedienungsanleitung

A. SAFETY INFORMATION (EN)
2. Unpack and check

2.1 Unpacking the product

WARNING
Choking hazard due to packaging material and
swallowing small parts.
Dispose of the packaging material immediately
in the household waste in accordance with the
regulations.
Keep the packaging and small parts required
for repackaging away from moisture and out of
the reach of children.
ATTENTION
Material damage.
Pointed, sharp and scratching objects can damage
the product when opening the packaging.
Do not use any pointed, sharp or scratching
objects to open the packaging.
Carry out the following steps carefully.
1. Remove adhesive and securing tapes by hand or use
scissors.
2. Place the carton with the direction arrows pointing
upward.
3. Open the packaging box.
4. Take all parts out of the box.
5. Lay the parts side by side on a clean, soft, and flat surface.
6. Check the contents for completeness and integrity.
7. Read the user and assembly instructions!
2.2 Check the contents of the delivery.
ATTENTION
Material damage.
Use with missing or defective parts can damage the
product.
Do not use the product incompletely
assembled or with defective parts.
Check that the scope of delivery is complete
and undamaged.
Hergestellt für Procommerce Group GmbH - Am Kreutweg 1 - 97204 Höchberg - Germany
3. Assemble
CAUTION
Verletzungsgefahr und Sachschaden.
Risk of injury and damage to property.
Modifying the product can lead to injuries and
damage to property.
Only use the product with the original parts
supplied and in its original condition.
Only use spare parts and accessories
approved by the manufacturer.
CAUTION
Risk of cuts and crushing. When assembling the
product, there is a risk of cuts to the hands and
arms.
Wear commercially available protective gloves
when unpacking, assembling and transporting the
product.
Only transport the product when it is unloaded.
ATTENTION
Damage to the product due to incorrect
assembly.
Assemble the product completely and securely.
ATTENTION
Property damage.
Do not place the shelf near heat sources or
ignition sources.
3.1 Aufstellort wählen
Choose a suitable installation location that meets the
following requirements:
The installation location is dry and can be ventilated
regularly.
The installation location is not exposed to
permanent strong temperature fluctuations.
The surface of the installation site is level and non-
slip.
3.2 Montieren
Follow the instructions in the installation and operating
instructions.
EN