Clas Ohlson AE2220X1 Kurzanleitung

USB External
Network Card
Art.no 38-3732 Model AE2220X1
Please read the entire instruction manual before using
the product and save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. If you have any questions
regarding technical problems please contact Customer
Services.
Safety
• The product should not be taken apart or modified.
• The product is designed for indoor use only.
• Do not place the device in damp, dusty environments
or where there are heavy vibrations.
Package contents
• USB External Network Card.
• CD with user manual and drivers.
• Installation quick guide.
Product description
• Compatible with USB 2.0 and USB 1.1.
• Compatible with IEEE 802.3 (10Base-T)
and IEEE 802.3u (100Base-TX) standard.
• Supports full-duplex and half-duplex.
• Supports suspend mode and remote
wakeup via link-up and magic packet.
• USB port operated.
• LED function indicators.
Installation
Note: Install drivers before connecting the network adapter.
Compatible with Windows 10/8/7/Vista (32/64-bit) and
XP/2000.
1. Insert the supplied CD into your computer's CD player.
2. Double click on Setup.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
3. Click on Next to start the installation.
4. Click on Install.
5. Click on Finish when the installation is complete.
6. Connect the external network card to a USB port.
A message will appear on the screen when the computer
has detected the network card.
7. Connect to the network using a network cable.
8. The network card will be shown as ASIX AX8877A
USB 2.0 to Fast Ethernet Adapter in Device Manager.
Device Manager is found as follows:
Windows 2000 and XP:
Right click on My Computer and select
Properties > Hardware > Device Manager.
Windows 7:
Right click on Computer and select
System Properties > Device Manager.
Windows Vista:
Right click on Computer and select
Properties > Device Manager.
What the LED's mean
LED Function
Green Lights when connected to
(power) a 100 Mbps network.
Off when connected to a 10 Mbps network
or no connection at all.
Yellow Flashes when data traffic passes between
(link) computer and network.
Specifications
IEEE 802.3 (10Base-T)
Standards
IEEE 802.3u (100 Base-TX)
Data transfer Ethernet: 10 Mbps
(Half/Full duplex)
Fast Ethernet: 100 Mbps
(Half/Full duplex)
Data Bus USB 2.0 (1.1 compatible)
LEDs Power and Link
Current draw 850 mW
Operation modes Off mode or power save mode
Network interface RJ45 socket
RAM Built-in 20 kB SRAM for
RX packet buffering and 20 kB
SRAM for TX packet buffering.
Operating system Windows 10/8/7/Vista (32/64-bit)
and XP/2000. MAC OS X10.
Size 66 × 22 × 15 mm (l × w × h)
Weight 25 g
Lenght of cable 15 cm
Operating temp. 0 to +70 °C
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any
harm to the environment or health
hazards caused by incorrect waste
disposal, the product must be handed in
for recycling so that the material can be
disposed of in a responsible manner. When
recycling your product, take it to your local
collection facility or contact the place of
purchase. They will ensure that the product
is disposed of in an environmentally sound
manner.