Technical Specifications; Main Components; Special Safety Regulations - Probuilder 44026 Gebrauchsanweisung

Introduction
Thank you for choosing this jig saw from PRO-BUILDER.
PRO-BUILDER is a range of heavy-duty tools for tradesmen
and quality-conscious DIY enthusiasts. You have purchased
a high-quality and well-designed tool that offers precision,
durability and reliability. By following the instructions in this
User Guide, your saw will provide many years of trouble-
free use.
Please read this User Guide and the general safety instruc-
tions enclosed before using the saw, to ensure you get maxi-
mum use from the tool. Keep the User Guide in a safe place
as you may need to refer to it at a later date.
Use
The saw is ideal for perfect and precise cutting at angles
from 0 (vertical) to 45°. It can be used for wood, metal and
man-made materials. The comfortable softgrip handle en-
sures comfortable operation and vacuum dust extraction
can be connected.

Technical specifications

Voltage:
Power rating:
Motor speed (free-running):
Max. saw depth/item thickness, wood blade:
Max. saw depth/item thickness:
blade, 45° degree:
Max. saw depth/item thickness, steel blade:
Laser type:
EN 60825-1:1994 + A2:2001 and A1:2002
Wavelength:
Power rating:
Acoustic pressure:
Sound output:

Main components

230V ~ 50Hz
750 W
0-3,000 RPM
80 mm
20 mm
10 mm
class 2 in accordance with
650 nm
1 mW
85.3 dB(A)
96.3 dB(A)
1. Speed selector
2. Handle
3. On/off button
4. Lock button
5. Allen key
6. Cord
7. Vacuum extractor nozzle
8. Ventilation slots
9. Soleplate
10. Pendulum regulation knob
11. Saw blade housing
12. Laser lens
13. Laser on/off switch
14. Laser lens adjustment screw

Special safety regulations

Do not use for cutting pipes or cables.
Do not use cracked, blunt or damaged blades.
Do not start the saw if no blade is fitted.
Check there are no obstructions in/on the surface under the
item to be cut.
Do not attempt to cut items thicker than the maximum cut-
ting depth of the blade, or where there is insufficient space
for the blade under the item.
The saw's metal parts may become conductive if the saw
comes into contact with a live wire. Therefore only hold the
saw by its insulated handle.
Check that the ventilation slots are not blocked.
Always use a face mask if excessive amounts of dust are
generated or cutting harmful materials.
Never stop the saw blade by applying pressure to the saw
or to the side of the blade.
Do not lift the saw from the item being cut if the blade is still
running.
Never place the saw on a table or workbench if it has not
stopped completely. The saw blade will continue to run a
short time after the machine has been switched off.
Do not touch the blade or metal filings until they have cooled.
Laser beams can cause permanent eye damage and must
therefore be used with care.
Do not direct the laser beam onto reflective surfaces, e.g.
mirrors or shiny surfaces.
Never look directly into the laser beam.
Never direct the laser beam at other people or animals.
15
ENGLISH