Phanteks AMP GH Handbuch Seite 4

USER MANUAL
WARNING! IMPORTANT SAFETY
INFORMATION
• NEVER, under any circumstances, open the power
supply unit. High voltage inside. WARRANTY IS VOID
once the cover is removed.
• DO NOT insert any object into the fan grill or the
ventilation area of the power supply unit.
• DO NOT place any object in front of the fan or the
ventilation area of the power supply unit that may
obstruct or restrict airflow.
• USE ONLY the Phanteks modular cables provided
with the power supply unit.
• Keep the power supply unit in a dry environment,
away from humidity.
• The power supply unit is for integration into a
computer system and not intended for external or
outdoor usage.
TROUBLESHOOTING
If the power supply unit fails to function properly,
please go through the below checklist.
• Check to make sure the AC cord is properly
connected to the AC outlet and the power supply
unit.
• Check to make sure the AC power is On.
• Check to make sure the AC On/Off switch on the
back panel of the power supply unit is in the "I"
(On) position.
• Check and secure all mainboard and peripheral
connectors.
• The AC On/Off switch on the back of the power
supply unit can be toggled between "I" and "O" a
few times, with a 0.5 second delay in between to
make sure the power supply unit is reset.
If you are still experiencing difficulties to get the
power supply unit to function properly, please visit
www.phanteks.com/support for further technical
support.
Notes
• The operation of power supply is a "pull" technology,
which means that the unit only provides the power
as demanded by the mainboard and the system
components.
• If there is a mainboard malfunction, the power
supply will not turn on.
• If there is a peripheral component malfunction,
the power supply will not provide power to that
particular component.
4
• This power supply complies with the latest ErP 2013
requirements. For optimal system performance,
please update your mainboard BIOS to the newest
version and configure the BIOS according to the
ErP 2013 requirements; enable all Energy Saving
functions for Standby and Normal operations
and disable Audio Always On. Please consult your
motherboard manufacturer for further assistance.
WARRANTY
Phanteks's Warranty covers
defects in materials or workmanship purchased
from an authorized Phanteks retailer from the date
of purchase. During the warranty period, Phanteks
maintains the discretion to either repair units or
replace broken components with parts of similar or
equal performance, provided that:
• The product is returned to the point of purchase,
postage prepaid.
• The product was properly used according to the
manufacturer's intended purposes.
• The product was not damaged due to acts of
nature, such as lightening, flood or fire.
• The product's cover was never removed and the
warranty sticker was not broken.
For additional details, please visit
www.phanteks.com/warranty
Note
• Warranty terms may vary between different
geographic regions.
DISCLAIMER
All efforts have been made to ensure accuracy of
all information provided herein. Phanteks assumes
no liability, expressed or implied, for any damage(s)
occurring to your system's components or other
devices as a result of any mistake or omission during
power supply installation or removal, or due to any
defect or failure of the product itself.
Please visit our homepage
www.phanteks.com for further details.
WARNING!
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. | Product: Switching Power
Supply | Model name: Please refer to the rating
label on the product. | Contact: www.phanteks.com/
support
products against