Zyllion ZMA-33B Bedienungsanleitung Seite 6

The lights at the top of the remote will indi-
cate which setting is on.
Neck Massage - Press to start. Press again to
turn off the neck massage.
•
•
•
Back Position - Press to start. Press again to
turn off the back massage.
•
•
•
•
•
FOR OPTIMUM RESULTS
• You may use this product 2-3 times per day to alleviate back and
neck pain.
• Feel free to enjoy a cup of warm water after using this product
to enhance metabolism.
• People operating computers or using their arms for extended
periods of time can use this massager to relax muscles, promote
good blood circulation, and prevent injuries.
9
Rotate - change rotating direction of
the massager.
Heating - turn on/off the heat func-
tion for the neck massager.
Up/Down - hold down to move the
nodes to better target an area. (When
the neck massager is off, pressing the
Up/Down buttons will cause the neck
massager to turn back on.)
Speed - choose from 2 speeds the
nodes will rotate at.
Spot - Nodes will rotate clockwise
and counter-clockwise quickly to
focus on one area.
Position - select from 3 different set-
tings - full back, lower back, or upper
back.
Heating - turn on/off the heat func-
tion for the back massager
Seat - Press to cycle through the
vibration intensities: low - medium -
high - off.
TROUBLE SHOOTING
Issue Probable Cause
You hear a
When the product is in oper-
mechanical sound
ation the massage heads will
when product is
make a mechanical sound.
in use
Overheating Protection
activated
Cannot turn on the
power
The power adapter is not
properly plugged into the
electrical socket
Remote control
light is blinking;
Massager stops
randomly during
Product is malfunctioning
massage;
Grinding/clicking
noises from the
massage head
Proper non-commercial use: This massager device is for private use
only and is not intended for medical or commercial purposes. This
device is solely intended to massage individual parts of the human
body. It cannot replace any form of medical treatment. Please consult
your physician if you are unsure whether or not this massager is
suitable for you.
If you are experiencing a problem with your ZMA-33B Massager, please
contact Zyllion, Inc. at 1.855.588.8168.
Zyllion, Inc. reserves the right to interpret any printing errors and
omissions at its own discretion.
Any product updates or design details are subject to change with-
out prior notice.
Solution
Normal Sound.
Let unit sit for 30 minutes
to cool off and then restart
Plug the electrical cord
securely into the electrical
socket
Contact Zyllion Custom-
er Service.
10