National Instruments NI cDAQ-9174 Bedienungsanleitung
Verwandte Anleitungen für National Instruments NI cDAQ-9174
Inhaltszusammenfassung für National Instruments NI cDAQ-9174
- Seite 1 cDAQ-9178...
- Seite 2 快速入门 cDAQ, LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
- Seite 4 NI LabVIEW NI-DAQmx Connect the cDAQ chassis to earth ground. Then install I/O modules. Refer to the module First, install application development software (if applicable). Then install NI-DAQmx driver operating instructions for signal connections. software. Commencez par installer le logiciel de développement d’applications (le cas échéant). Connectez le châssis cDAQ à...
- Seite 5 Measurement & Automation Explorer (NI MAX) Take your first measurement in MAX. Right-click any module and select Test Panels. Connect the power supply. Then connect the cDAQ chassis to a USB port on your Configure the measurement settings and click Start. computer.