Werbung
2. SETTINGS:
When the device is connected to the network for about 3 seconds, all LCD screen fields will light up (Fig. 1).
IMPORTANT: Before first use, place the device in socket for at least 30 minutes to charge the battery. Press the RESET button before programming.
2.1 CLOCK SETTINGS:
Press "CLOCK" button more than 3 seconds, and it will enter into clock setting mode.
1) Time setting
Press "SET" button, the triangle before "HOURS" will blink, then press "UP" button to set the hours (range 0-24).
2) Minutes setting
Press "SET" button again, the triangle before "MINUTES" will blink, then press "UP" button to set the minutes (range 0-60).
3) Setting the day of the week
Press "SET" button once more, the triangle before "WEEKS"will blink, then press "UP" button to set the week, successively
MO-TU-WE-TH-FR-SA-SU
4) Press "OK" button to enter into clock mode
5) Press "CLOCK"+"SET" buttons, you can choose SUMMER TIME or WINTER TIME
6) Press" CLOCK"+"PROG" buttons, you can choose 24 Hours Time or 12 Hours Time
2.2 TIMER PROGRAM SETTING:
1) Press "PROG" button, it will enter into timer program setting mode, you can set 16 groups ON and OFF timer program.
2) Press "SET" button for setting 1st program ON time, the triangle before "HOURS" will blink, then press "UP" button to set the hours.
3) After finishing "HOURS" setting, pls press "SET" button again, the triangle before "MINUTES" will blink, then press "UP" button to set the minutes.
4) After finishing "MINUTES" setting, press "SET" button once more, the triangle before "WEEKS" will blink, then press "UP" button to set the week.
You can set the following day of the week combinations:
of individual days MO→TU→WE→TH→FR→SA→SU
Monday, Tuesday, Wednesday, Thursday, Friday MO TU WE TH FR
weekend (Saturday, Sunday) →SA SU→
Monday to Saturday MO TU WE TH FR SA
Monday, Wednesday, Friday MO WE FR
Tuesday, Thursday, Saturday TU TH SA
Monday, Tuesday, Wednesday MO TU WE
Thursday, Friday, Saturday TH FR SA
all week from Monday to Sunday MO TU WE TH FR SA SU
5) After finishing above all operation, press "PROG" button to enter into 1st program OFF time setting. If you want set next group program ON and OFF time, continue to
press "PROG" button, and do as above operation.
6) After finishing all timer program setting, press "OK" button to enter into clock mode.
7) If you want the timer will be turned on some times later, press "SET" button to change "OFF" mode into "AUTO" mode; if you want the timer will be turned off some
times later, press "SET" button to change "ON" mode into "AUTO" mode.
8) If you want to cancel set timer program, press "PROG" button to select that one, and then press "CLEAR" button for canceling.
2.3 RANDOM FUNCTION
Random function is only activated from PM6:00 to AM6:00, If you want start this function, except choosing the AUTO mode, you should set a timer program, and the timer
program shoulld be within the range (PM6:00 to AM6:00).
1) Press "SET" and "UP" button at the same time, Random function will be activated.
2) If you want to cancel Random function, pls press "SET" and "UP" button at the same time,then the letters "RANDOM" on LCD will disappear.
2.4 COUNT DOWN TIME FUNCTION
The countdown function only works in "ON" and "OFF" modes and does not work in RANDOM mode.
1) Press "UP" and "PROG" button at the same time, and it will enter into countdown time setting mode.
2) With the "UP" button set ON or OFF. When set to "ON" the programmer will turn off the power after the set time, when set to "OFF" the programmer will turn on the
power after the set time.
3) Press "SET" button once - the hour digit starts flashing. Press the "UP" button ["UP"] button to set the hour (0-99).
4) After setting the hour, press the "SET" button again.
5) The digit for minutes will start flashing on the display. Press the "UP" button ["UP"] to set the minutes (0-59).
6) After setting the minutes, press the "SET" button again.
7) The digit for seconds will start flashing on the display. Press the "UP" button ["UP"] to set the seconds (0-59).
8) Press the "SET" button to complete the settings.
9) If you set two countdown modes at the same time "COUNT DOWN1", "COUNT DOWN2", the programmer will start countdown timer function 1 and then countdown
timer function 2 (modes will follow one after another, only after the end of countdown timer 1 will countdown timer 2 start).
10) After setting the countdown back parameters, press SET to activate it.
11) To cancel the COUNT DOWN function press the "CLOCK" button. „COUNTDOWN" will disappear from the display.
DE
Mit dem Programmiergerät wird die Zeit zum Ein- und Ausschalten elektrischer Geräte in einem bestimmten Zeitintervall eingestellt. Es kann den Betrieb aller elektrischen
Geräte wie Beleuchtung, Klimaanlage, Warmwasserbereiter und Elektroherd steuern. Es verfügt über 16 Zeitprogramme, vier große Tasten und ein großes LCD-Display für
eine einfache Bedienung und eine klare und transparente Messung.
Funktionen:
- 16 Zeitprogramme
- Handbetrieb EIN / Automatik AUTO / Hand AUS
- 12 oder 24 Stunden Modus
- 2 Countdown-Zeitmodi COUNT DOWN max. 99 Stunden 59 Minuten
- Sommerzeit- und Winterzeitfunktion
- Funktion zum zufälligen Ein- und Ausschalten von RANDOM
FEATURE
TECHNISCHE DATEN
Versorgungsspannung:
230VAC
Frequenz:
50 Hz
Max. Strom:
16A
5
Bedienungs- und Montageanleitung
Werbung
