www.rixgmbh.de
3. This device is not intended to be used by persons with limited physical, sensory or mental abilities or insuffi cient experi
ence and knowledge, unless they are accompanied by a person responsible.
4. We discommend having the device used by children unless they are accompanied by a person responsible for their
safety.
5. There are no user-repairable components within; do not open up the unit for any reason, and do not insert any body
parts or objects into the unit.
6. Do not cover the unit during use.
7. Do not look at the light directly. This can cause damage.
8. Cleaning and storage: wipe down all surfaces using a damp (not wet) cloth. Make sure that the unit is completely dry
before storage or turning on again.
9. Save these instructions.
TECHNICAL SPECIFICTIONS
Battery : 2 x 2000mAh Rechargeable Lithium Ion Battery
Output (light) : 100 Lumen
Micro USB Input : DC 5V
USB Output : DC 5V.1A
Dimensions : ø 22 cm x 12 cm depth
Battery Charging Time : 7 h
Weight : 497 g
Run time (approximate maximum values) : Light alone (Low): 30h – Light alone (High): 10h
Fan alone (Low): 35h – Fan alone (High): 6h 30mins
Light + Fan (Low): 13h30mins – Light + Fan (High): 8h45 mins
OPERATION
1. Push the multi-position stand open so that it latches on to one of the positions. Or (if you want to hang the unit) Unfold
the hanging hook and hang the unit as desired.
2. LED Light: The LED light will bee operated as below upon pressing the LED button.
- Low brightness (Button pressed for the fi rst time)
- High brightness (Button pressed for the second time)
- OFF (Button pressed for the third time)
3. Fan: The fan will be operated as below upon pressing the fan button.
- Low Speed (Button pressed for the fi rst time)
- High Speed (Button pressed for the second time)
- OFF (Button pressed for the third time)
DEVICE CHARGING
To charge your phone (or other mobile device), connect the deviceé USB
charging cable (not supplied) for devices that donot have micro-USB
charging port.
CHARGING THE BATTERY
1. Turn off te unit completely before charging
2. Connect the micro-USB cable tot he Micro-USB Input port on the rear of
the unit.
3. Connect the other end to a suitable USB charging adaptor (see Technical
specifi cations) and plug it into the mains
supply. Small red indicator light will glow to indicate that battery is charging.
6