Using The Controller - Costway Cb10706 Bedienungsanleitung

5
First, insert the motor plug and power plug into the socket of the
controller, and then use a cable clip (7) to organize the wiring
harness and fix it in the appropriate position on the desktop.
6
After completing the
above steps, flip the
table over and place it
on a flat surface. After
turning on the power,
long press the "down"
button to reset the table
and it can be used
normally.
10

Using the Controller

● Raise the Desk
Press the button to raise the desk continuously until it reaches
the highest position or the button is released.
● Lower the Desk
Press the button to lower the desk continuously until it reaches
the lowest position or the button is released.
● Select Height Setting 1
Press the button, and the desk will move to the height that was
previously set for that button.
● Select Height Setting 2
Press the button, and the desk will move to the height that was
previously set for that button.
Save Current Height Setting
Short-press the button, and the screen will show 'S-' . Press the
, , button to save the current height setting to that button.
When you press the , button, the desk will move to the
height that was previously set for that button. Any button-press will
stop the desk.
11