Chronograph. Setting of the chronograph hands
into the original (zero) position.
I.
Put the setting crown into Position 3.
II.
Push the buttons A and B simultaneously and hold them for 2 seconds.
You will see how the chronograph seconds counter will turn on 360
degrees – the
correction mode
А
I
1
2
В
28
will start.
А
3
В
Correction mode
Put the chronograph seconds
counter to 12.
Short press on button A – the hand moves by one dial
indication mark.
Long press on button A – the hand rotates rapidly.
To change to the chronograph watch counter settings press
button B.
Set the chronograph watch count on 12.
II
Short press on button A – the hand moves by one small dial
indication mark.
Long press on button A – the hand rotates rapidly.
To switch to the chronograph minute counter settings press
button B.
Continued on the next page
А
В
29