LEDmaxx 9801W Kurzanleitung Seite 2

Lamp holder
with switch and plug
Product information
Articel number:
9801W: E14, white
9801S: E14, black
9802W: E27, white
9802S: E27, black
Package Contents
• Lamp holder E27 / E14
• 3,5m cable with integrated switch
• Plug
Safety instructions
• Use the product indoors only.
• Ensure that the cable and the socket are not damaged.
• Only connect the product to a socket with the appropriate voltage (220-240 V).
• The maximum wattage of the bulb used in the E27 socket must not exceed 60 W..
The maximum wattage of the bulb used in the E14 socket must not exceed 40 W..
• Turn o the power supply before replacing the bulb or performing maintenance.
LEDmaxx GmbH
Assembly instructions:
Wiesenweg 2
97353 Wiesentheid
Registrierungsnummer: HRB 13677 Check the Product:
• Carefully unpack the product and ensure that all parts are present and undamaged
Insert the Bulb:
• Make sure the product is disconnected from the power supply.
• Carefully screw in a suitable bulb into the socket.
Avoid overtightening the bulb to prevent breakage.
Connecting to Power:
• Plug the cable's plug into a qower outlet.
• Avoid bending or stressing the cable to ensure a longer lifespan.
Switching the Lamp On/O :
• Use the integrated switch on the cable to turn the lamp on and o .
• The switch is located approximately halfway down the cable and is easy to operate by pressing
Placing the lamp:
• Hang the lamp holder at the desired location, such as above a table or in a corner.
• Ensure that the cable is not in the way and does not pose a tripping hazard.
Maintenance and Care:
• Turn o the lamp and unplug it before performing any maintenance.
• Clean the socket and cable regularly with a dry or slightly damp cloth. Avoid using harsh cleaning agents.
• Regularly inspect the cable for damage and replace it if necessary.
Disposal Instructions:
• Dispose of the product in an environmentally friendly manner. Electronic devices and accessories should
not be disposed of in household waste. Use appropriate recycling facilities.
Contact for Questions and Issues:
• If you have any questions or encounter any problems, please contact the manufacturer's customer service.
1
2