iOttie Easy One Touch Wireless 2 Handbuch Seite 4

Installation
I. Assembling the Mount
D
A. Connect the Mount Cradle with
the Ball Joint.
2. Selecting a Location
Choose an installation method: Dashboard/Flat
Windshield/Curved Glass (B).
Option A
Dashboard or Flat Surface
Choose an area on a flat surface on
and wipe any dust Or debris from the surface.
C)
1. Peel Off the film 2. Peel offthe
on the dashboard film on the Suction Cup
pad & stick on the and press mount firmly
desired installation onto
pad.
location.
B. Then, tighten the Cradle
Surface (A) or
Installation
the vehicle's dashboard
cup
protective 3. Push Locking Lever
down to engage
suction.
the dashboard
Option B
Windshield
Choose a location
or debris from
Knob.
. Peel Off the protective
Suction Cup and press firmly onto
the windshield.
Adjusting
o
Telescopic Knob
Located on top of Telescopic
loosen to extend
tighten to secure distance.
Installation or Curved Glass
on the windshield and wipe any dust
the surface.
C
STICKY sucllcn cup
film on the Push Locking Lever down to
2.
engage
the Mount
Pivot
Arm, Located
the arm, and
Base, turning allows you to pivot
telescopic
position.
Installation
suction.
Knob
on the side of the Mount
arm. Tighten to secure