Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.
Carefully remove the quartz glass (11) from the UV-C cap (7).
8.
Inspect the quartz glass (11) for any cracks or damage, if necessary,
replace the quartz glass (11).
9.
Inspect the red seal (10) of the quartz glass, clean and replace the red
seal (10) if there are any signs of damage.
10. If the UV-C lamp (9) needs to be replaced, remove it from the globe
fitting and replace with a new lamp.
Use the appropriate type of UV-C lamp, as indicated on the lamp or lamp
label. The wrong UV-C lamp will break and may cause damage
to other components of the pressure filter. Hold the new UV-C lamp with
a clean cloth.
11. Put the quarts glass (11) back by pushing it in to the UV-C cap (7).
12. Tighten the coupling nut (12) of the quartz glass (11) thoroughly.
13. Inspect the white seal (8) of the UV-C cap (7), clean and replace the
white seal (8) if there are any signs of damage.
14. Position the UV-C cap (2+7) straight up on the lid (13) and secure in
place with 2 hands.
15. Mount the 4 screws from the UV-C cap (2+7).
16. Put the pump into operation by plugging it into the power outlet. Follow
the pump instructions carefully.
17. If no leaking is found, you can also put the UV-C lamp of the pressure
filter into operation by plugging it into the power outlet.
Description of parts: (illustrations 11 and 12, page 6 and 7)
No.
Description
1
UV-C viewing glass
2
UV-C cover lid
3
UV-C ballast
4
Earthing plate
5
Switch plate
6
Switch
7
UV-C cover base
8
O-ring UV-C cover
Ø72x2.65
9
UV-C lamp
10
O-ring quarts glass
Ø48x3.1
11
Quarts glass
12
Quarts glass nut
13
Pressure filter lid
14
Distribution plate
15
Lid distribution chamber
16
Screw 3.9x16
17
Distribution valve
18
Stainless steel rotating
handle
19
Fill indicator fixing
20
Fill indicator
21
O-ring axle Ø13x3.1
22
Nut fitting
23
Hose fitting or tap with
hose fitting
English
www.auga.nl
No.
Description
24
O-ring knob Ø35x3.1
25
UV-C tube
26
Distribution valve
27
Hose fitting seal or tap with hose
fitting
28
Tap with hose fitting
29
Bearing above rotating handle
30
Knob
31
Coupling rotating handle
32
Rotating handle
33
Button rotating handle
34
Wringer
35
Filter foam
36
Bearing under rotating handle
37
Distribution plate
38
Fixing filter foam
39
UV-C pipe cap
40-1
Bio-ring lid
40-2
Bio-ring
40-3
BioBalls
41
Tank seal Ø346x8
42
Clamp ring
43
Tank
44
Fixing clamp ring
38
Werbung
