Interra iX2 Kurzanleitung

iX2 2'' KNX Touch Panel
Product Code ITR332-XXXX
Power Supply KNX Power supply
Current Consumption 20 mA
Depends on model (2 to 8 button)
Buttons
1 x KNX Programming button
Temperature Sensor (±0.2°C sens.)
Humidity Sensor (±2 %RH sens.)
Sensors
Air Quality Sensor (0-500 VOC Index)
Ambient Light Sensor (Up to 1800 Lux.)
Interfaces TFT Touch Screen*
Commissioning Mode S-Mode
Type of Protection IP 20
Operation (-5°C...45°C)
Temperature Range
Storage (-20°C...60°C)
Maximum Air Humidity < 90 RH
Colour Black, White
Dimensions 90 x 90 x 7.25 mm (W x H x D)
Certification KNX Certified
Configuration Configuration with ETS
*:
Depend on model
© 2024 INTERRA
DESCRIPTION
Interra iX2 is a wall-mounting room controller device with an
integrated temperature, humidity, air quality and brightness
sensor. The iX2 can control heating and cooling operating
modes with 2-points, Continuous and PWM thermostat
functions. Each touch button is equipped with RGB LEDs to
provide feedback for visualization. The LCD models, on the
other hand, are equipped with touch TFT LCD technology
that provides a good viewing angle. Moreover, there is blue
navigation LED for orientation nightlight. The device pro-
vides an adjustable LCD backlight and LEDs intensity for
user comfort. The product range has 12 different models
with AQI, without AQI, with LCD and without LCD. All models
can be programmable with the same ETS database, which
provides efficient commissioning.
LCD Model Slider Model
MODELS AND VARIATIONS
I T R 3 3 2 - X X X X
1 2 3 4
X : X :
Slider/LCD/AQI Reserved
1 3
X : X :
Button count Colour
2 4
X
Button Count
2
2
2 Buttons
4
4 Buttons
8
8 Buttons
MAIN FUNCTIONAL CHARACTERISTICS
•
Switching, toggle, dimming, shutter/blinds controls,
predetermined scenes by users, value functions that
can send presented values, 2 channels control func-
tions, thermostat air conditioning functions, and step-
switching mode features are available.
•
It can measure with integrated temperature, humidity,
brightness and air quality (depending on the model)
sensors.
•
Configurable and programmable External Inputs as
analog or digital over ETS.
•
Scenes from 1 to 64 can be specified and these
scenes can be implemented by request.
•
Room temperature regulation can be done with 2 –
Points (Hysteresis), PWM or Continuous PI control
options.
•
Operating modes: comfort, standby, economy and
protection.
•
Automatic switching between operating modes via
the weekly program.
•
Each LED can be configured independently from
buttons.
•
External – internal temperature, (measured, setpoint,
outdoor values as ºC and ºF), operating mode, set-
tings, air quality index, fan control, humidity, and on/
off features are displayed on LCDs.
•
Enhanced and extended LCD Screen functions.
•
In the display model, mode and fan controls can be
operated from the screen.
X
0 1 2
1
Slider 
✓ ✓
LCD
 
✓
AQI  
✓
X
Colours
4
1 Black
2 White
1/6
LCD DISPLAY
iX2 has fully capacitive touch LCD screen with TFT-
display technology and 128x160 resolution for 2 inches.
LCD backlight can be automatically switch down while
not using the device or changeable from the bus or
manually via the device.
All functions can be controlled over fully touchable LCD
screen. All functions have their own screen and the
users can configure the screen over ETS database.
Icon Meaning Icon
General
Auto/Manual Bright-
ness
Lock On
Mute
Settings
Thermostat Error
AQI Error
Room Controller (Thermostat)
3
Comfort Mode

Economy Mode
✓
Auto Mode
✓
Heat Mode
Heat/Cool Auto
Meaning
Clean Mode
Lock Off
Unmute
Brightness Error
Humidity Error
KNX Connection
Error
Standby Mode
Protection Mode
Cool Mode
Heat/Cool
Manual
Dehumidify
DS2406280226A